[OZAPRS] Direwolf config help

Tue Mar 10 17:49:44 AEDT 2020

I hadn’t looked carefully enough at the msg to see that they are IG=>RX rather than beacons that you issued.  I see the same problem would occur with my digigate if a mobile station using aprsdroid to the phone system with excessively short intervals was to pass within my local radius which would cause me to send excessive position beacons to RF, for which I’d like to see a DW parameter to limit the number from any particular station within a time period.  In an ideal situation the excessive or multiples wouldn’t be sent but it would be good to be able to trap them if/when they occur.

Graeme 2HFG

From: Wade Smith 
Sent: Tuesday, March 10, 2020 4:48 PM
To: Australian APRS Users 
Subject: Re: [OZAPRS] Direwolf config help

Fantastic. Thanks. I’ll have a deeper look at that data. - that’s a separate stream of data in testing via vk1xt - from ESA’s website on the things they are doing, from dog bites to house fires. 

The polygons are an interesting beast.  Myself and 1MA noted on say xastir being fed by Direwolf they appear one minute. Gone the next. When they were visible there interesting. The line colour around the fire edge even was the same as the standard alert colours and relevant to that fire - blue, yellow, red etc. 

I have also been in contact with the AU WX BOT developer to make sure I am using the service to the best of my ability. 

The WX BOT data goes out roughly every 15 mins from that data stream so yes, every fire within 100km of RGI during jan every 15mins was overwhelming to say the least. I am sorry for the data hog on the air, but as you note it was the quantity of the fires / data going out. 

Thanks again 

On Tue, 10 Mar 2020 at 16:41, Graeme <graeme at abrona.com.au> wrote:

  Hello Wade,

  Is this useful?

  Digipeater VK1RGI-1 audio level = 38(16/14)   [NONE]   _::||||__
  [0.3] VK1MIC-1>APDW15,VK1RGI-1*:}VK1XT-15>APRS,TCPIP,VK1MIC-1*:;ACTESA705*100427z3511.98SA14903.73E'MOTOR VEHICLE ACCIDENT - SPENCE (On Scene)
  Third Party Header, Ambulance, DireWolf, WB2OSZ

  Digipeater VK1RGI-1 audio level = 37(16/14)   [NONE]   ||||||:__
  [0.3] VK1MIC-1>APDW15,VK1RGI-1*:}VK1XT-15>APRS,TCPIP,VK1MIC-1*:;ACTESA705*100427z3511.98SA14903.73E'MOTOR VEHICLE ACCIDENT - SPENCE (On Scene)
  Third Party Header, Ambulance, DireWolf, WB2OSZ

  Digipeater VK1RGI-1 audio level = 38(17/13)   [NONE]   __::||:__
  [0.4] VK1MIC-1>APDW15,VK1RGI-1*:}VK1XT-15>APRS,TCPIP,VK1MIC-1*:;ACTESA659_100543z3520.18S/14908.83E:STRUCTURE FIRE - NARRABUNDAH (Out / Completed)
  Third Party Header, Ambulance, DireWolf, WB2OSZ

  Digipeater VK1RGI-1 audio level = 38(16/15)   [NONE]   _||||||__
  [0.3] VK1MIC-1>APDW15,VK1RGI-1*:}VK1XT-15>APRS,TCPIP,VK1MIC-1*:;ACTESA659_100543z3520.18S/14908.83E:STRUCTURE FIRE - NARRABUNDAH (Out / Completed)
  Third Party Header, Ambulance, DireWolf, WB2OSZ

  The volume of alerts during the fires was rather overwhelming due to the sheer number of fires.  I didn’t see any polygons and the original fire positions didn’t give any indication as to the current fronts.  How might the polygons be viewed?

  Graeme 2HFG

  From: Wade Smith 
  Sent: Tuesday, March 10, 2020 4:27 PM
  To: Australian APRS Users 
  Subject: Re: [OZAPRS] Direwolf config help

  Thanks Graeme,

  Could you grab me a screenshot of it. I have a feeling it might be a polygon and an object going out together but I would love to see the raw stuff.
  Any further comments?

  Ta

  W

  On Tue, 10 Mar 2020 at 16:21, Graeme <graeme at abrona.com.au> wrote:

    Hello Wade,

    Seeing as you asked, are you aware that your alerts are still going out in duplicate?

    Graeme
    VK2HFG

    From: Wade Smith 
    Sent: Tuesday, March 10, 2020 4:06 PM
    To: Australian APRS Users 
    Subject: Re: [OZAPRS] Direwolf config help

    Hi All,

    So my APRS / WX / FIREALERT system was running all over the horror summer period.

    I know there was some discussion about double packets etc, other than that did anyone have any feedback on the system?

    Did you find it useful? 

    To give a bit more context about what the system was doing:

    * TX NSWRFS, ACTESA and CFA fires as objects, 100km around the VK1RGI location
    * TX NSWRFS, ACTESA and CFA fires, 100km around the VK1RGI location as polygons showing *very* rough fire size
    * TX BOM weather alerts within 100km around the VK1RGI location

    Thanks 

    Wade 
    VK1MIC

    On Mon, 4 Nov 2019 at 08:44, Justin Albury <justin at jacomms.com> wrote:

      Nice work mate 😊

      Justin

      VK2JUZ

      From: OZAPRS <ozaprs-bounces at aprs.net.au> On Behalf Of Wade Smith
      Sent: Monday, 4 November 2019 8:10 AM
      To: Australian APRS Users <ozaprs at aprs.net.au>
      Subject: Re: [OZAPRS] Direwolf config help

      Thanks to all that helped.  I now have all fire and serve weather going out with a range of 150km from the location of VK1RGI-1 (picked for testing)  - the server seems to re transmit and therefore broadcast the alerts at Minute 16,36,47 and 2(?) approx of the hour so if there is a lot of fires or alerts within that 150km range it cant be abit of a blast of data going out.

      I am happy to share my config file for any one to use for their igates

      W

      _______________________________________________
      OZAPRS mailing list
      OZAPRS at aprs.net.au
      http://lists.aprs.net.au/mailman/listinfo/ozaprs

    -- 

    -- 

    Wade

    VK1MIC.com

----------------------------------------------------------------------------
    _______________________________________________
    OZAPRS mailing list
    OZAPRS at aprs.net.au
    http://lists.aprs.net.au/mailman/listinfo/ozaprs

    _______________________________________________
    OZAPRS mailing list
    OZAPRS at aprs.net.au
    http://lists.aprs.net.au/mailman/listinfo/ozaprs

  -- 

  -- 

  Wade

  VK1MIC.com

------------------------------------------------------------------------------
  _______________________________________________
  OZAPRS mailing list
  OZAPRS at aprs.net.au
  http://lists.aprs.net.au/mailman/listinfo/ozaprs

  _______________________________________________
  OZAPRS mailing list
  OZAPRS at aprs.net.au
  http://lists.aprs.net.au/mailman/listinfo/ozaprs

-- 

- 
VK1MIC.com

--------------------------------------------------------------------------------
_______________________________________________
OZAPRS mailing list
OZAPRS at aprs.net.au
http://lists.aprs.net.au/mailman/listinfo/ozaprs
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.aprs.net.au/pipermail/ozaprs/attachments/20200310/8d304b86/attachment.htm>