[OZAPRS] VK2RHR-1 WIDE1 odd ?

[Josh]

> VK2LJ-6>S3T1Y2,VK2RHR-1,WIDE1,VK1RGI-1*:

That looks ok, RHR filled the WIDE1-1 slot (reducing the first path to
WIDE1-0, aka WIDE1) so RGI should have heard it as WIDE1,WIDE2-1,VK2RHR-1
Then RGI filled the WIDE2-1 slot, but instead of decrementing the
available hops and adding the callsign it looks like it did call
substitution, replacing the WIDE2-1 with its own call? Not ideal, but
not uncommon either. I'm guessing your DIGIPEAT rule isn't quite right?

> VK2LJ-6>S3T1Y2,WIDE1-1,WIDE2-1,qAR,VK2RHR-1:
Yes, that looks like RHR didn't decrement the WIDE1-1 - or there was
something screwy with the original path.
But I didn't hear the frame like that from here.

My igate heard that frame via VK2LJ-1 first, with the WIDE1-1 already
filled:

2017-11-12 13:26:26 Digipeater VK2LJ-1
VK2LJ-6>S3T1Y2,VK2LJ-1*,WIDE2-1:`O[<l sk\'"6j}|&Q%o'p|!wTA!|3

Then from VK2AMW-1, which appears to have heard it directly from VK2LJ-6
2017-11-12 13:26:28 Digipeater VK2AMW-1
VK2LJ-6>S3T1Y2,VK2AMW-1*,WIDE2-1:`O[<l sk\'"6j}|&Q%o'p|!wTA!|3

Then VK2RHR-1, which also heard the original frame from LJ-6
- this is what RGI should have heard
2017-11-12 13:26:31 Digipeater WIDE1 (VK2RHR-1)
VK2LJ-6>S3T1Y2,VK2RHR-1,WIDE1*,WIDE2-1:`O[<l sk\'"6j}|&Q%o'p|!wTA!|3

The path looks fine to me in all three of those, so I don't think RHR-1
is messing anything up here.
I would be looking at RGI's rules and rx+tx debug to see if it is
somehow prepending the path with a WIDE1-1.

- Josh VK2HFF

On 12/11/2017 1:37 PM, Glen English VK1XX wrote:
> Is this a dire wolf config issue ?
> 
> VK1RGI-1 leaving WIDE1 in the address list ?
> 
> or is this another RHR funny ?
> 
> VK2LJ-6>S3T1Y2,VK2RHR-1,WIDE1,VK1RGI-1*:
> <UI>:                                 
> `O[<l sk\'"6j}|&R%m'p|!wTA!|3
> 
> How do I troubleshoot this- look at the raw packets
> 
> here is one of the sightings.....
> 
> 2017-11-12 13:26:26 AEDT:
> VK2LJ-6>S3T1Y2,WIDE1-1,WIDE2-1,qAR,VK2RHR-1:`O[<l sk\'"6j}|&Q%o'p|!wTA!|3
> 
> 
> 
> On 12/11/2017 1:01 PM, Glen English VK1XX wrote:
>> naa not really the right geometry. more like MEL - BNE
>>
>> or something SYD-ADL maybe...
>>
>> it is highly unlikely weather for ducting.
>>
>>
>> On 12/11/2017 11:50 AM, Graeme wrote:
>>> The morning Sydney-Brisbane flight path perhaps?
>>>
>>> -----Original Message----- From: Glen English VK1XX
>>> Sent: Sunday, November 12, 2017 8:21 AM
>>> To: ozaprs at aprs.net.au
>>> Subject: Re: [OZAPRS] ginini-1 up (Glen English VK1XX)
>>>
>>> maybe some aircraft in the path for enhancement.
>>>
>>>
>>> On 12/11/2017 7:53 AM, Graeme wrote:
>>>> Spotted some bouncing about on my igate's log a few minutes ago..
>>>>
>>>> Digipeater VK2RTM-1 audio level = 18(6/8)   [NONE]   |||||____
>>>> [0.2] VK2RCC-1>APOT21,VK1RGI-1,VK2RTM-1*:!3120.76S214901.57E#13.0V
>>>> 6C Coonabarabran NSW W2 Digipeater
>>>> Position, OVERLAY DIGI (green star) w/overlay 2, Open Track
>>>> S 31 20.7600, E 149 01.5700
>>>> 13.0V   6C Coonabarabran NSW W2 Digipeater
>>>>
>>>> Graeme VK2HFG
>>>>
>>>> -----Original Message----- From: Glen English VK1XX
>>>> Sent: Sunday, November 12, 2017 7:44 AM
>>>> To: ozaprs at aprs.net.au
>>>> Subject: Re: [OZAPRS] ginini-1 up (Glen English VK1XX)
>>>>
>>>> Hi Ian
>>
>> _______________________________________________
>> OZAPRS mailing list
>> OZAPRS at aprs.net.au
>> http://lists.aprs.net.au/mailman/listinfo/ozaprs
> 
> 
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>