[OZAPRS] VK2RHR-1 WIDE1 odd ?

[Glen English VK1XX]

Hi Josh

thanks for the write up.

yeah doesn't happen from anywhere else and quite a few stations coming
in from RHR suffering the same thing.

I will log into the site when I can and look at logs/raw data

cheers



On 12/11/2017 2:19 PM, Josh wrote:
>> VK2LJ-6>S3T1Y2,VK2RHR-1,WIDE1,VK1RGI-1*:
> That looks ok, RHR filled the WIDE1-1 slot (reducing the first path to
> WIDE1-0, aka WIDE1) so RGI should have heard it as WIDE1,WIDE2-1,VK2RHR-1
> Then RGI filled the WIDE2-1 slot, but instead of decrementing the
> available hops and adding the callsign it looks like it did call
> substitution, replacing the WIDE2-1 with its own call? Not ideal, but
> not uncommon either. I'm guessing your DIGIPEAT rule isn't quite right?
>
>> VK2LJ-6>S3T1Y2,WIDE1-1,WIDE2-1,qAR,VK2RHR-1:
> Yes, that looks like RHR didn't decrement the WIDE1-1 - or there was
> something screwy with the original path.
> But I didn't hear the frame like that from here.
>
> My igate heard that frame via VK2LJ-1 first, with the WIDE1-1 already
> filled:
>
> 2017-11-12 13:26:26 Digipeater VK2LJ-1
> VK2LJ-6>S3T1Y2,VK2LJ-1*,WIDE2-1:`O[<l sk\'"6j}|&Q%o'p|!wTA!|3
>
> Then from VK2AMW-1, which appears to have heard it directly from VK2LJ-6
> 2017-11-12 13:26:28 Digipeater VK2AMW-1
> VK2LJ-6>S3T1Y2,VK2AMW-1*,WIDE2-1:`O[<l sk\'"6j}|&Q%o'p|!wTA!|3
>
> Then VK2RHR-1, which also heard the original frame from LJ-6
> - this is what RGI should have heard
> 2017-11-12 13:26:31 Digipeater WIDE1 (VK2RHR-1)
> VK2LJ-6>S3T1Y2,VK2RHR-1,WIDE1*,WIDE2-1:`O[<l sk\'"6j}|&Q%o'p|!wTA!|3
>
> The path looks fine to me in all three of those, so I don't think RHR-1
> is messing anything up here.
> I would be looking at RGI's rules and rx+tx debug to see if it is
> somehow prepending the path with a WIDE1-1.
>
> - Josh VK2HFF
>
> On 12/11/2017 1:37 PM, Glen English VK1XX wrote:
>> Is this a dire wolf config issue ?
>>
>> VK1RGI-1 leaving WIDE1 in the address list ?
>>
>> or is this another RHR funny ?
>>
>> VK2LJ-6>S3T1Y2,VK2RHR-1,WIDE1,VK1RGI-1*:
>> <UI>:                                 
>> `O[<l sk\'"6j}|&R%m'p|!wTA!|3
>>
>> How do I troubleshoot this- look at the raw packets
>>
>> here is one of the sightings.....
>>
>> 2017-11-12 13:26:26 AEDT:
>> VK2LJ-6>S3T1Y2,WIDE1-1,WIDE2-1,qAR,VK2RHR-1:`O[<l sk\'"6j}|&Q%o'p|!wTA!|3
>>
>>
>>
>> On 12/11/2017 1:01 PM, Glen English VK1XX wrote:
>>> naa not really the right geometry. more like MEL - BNE
>>>
>>> or something SYD-ADL maybe...
>>>
>>> it is highly unlikely weather for ducting.
>>>
>>>
>>> On 12/11/2017 11:50 AM, Graeme wrote:
>>>> The morning Sydney-Brisbane flight path perhaps?
>>>>
>>>> -----Original Message----- From: Glen English VK1XX
>>>> Sent: Sunday, November 12, 2017 8:21 AM
>>>> To: ozaprs at aprs.net.au
>>>> Subject: Re: [OZAPRS] ginini-1 up (Glen English VK1XX)
>>>>
>>>> maybe some aircraft in the path for enhancement.
>>>>
>>>>
>>>> On 12/11/2017 7:53 AM, Graeme wrote:
>>>>> Spotted some bouncing about on my igate's log a few minutes ago..
>>>>>
>>>>> Digipeater VK2RTM-1 audio level = 18(6/8)   [NONE]   |||||____
>>>>> [0.2] VK2RCC-1>APOT21,VK1RGI-1,VK2RTM-1*:!3120.76S214901.57E#13.0V
>>>>> 6C Coonabarabran NSW W2 Digipeater
>>>>> Position, OVERLAY DIGI (green star) w/overlay 2, Open Track
>>>>> S 31 20.7600, E 149 01.5700
>>>>> 13.0V   6C Coonabarabran NSW W2 Digipeater
>>>>>
>>>>> Graeme VK2HFG
>>>>>
>>>>> -----Original Message----- From: Glen English VK1XX
>>>>> Sent: Sunday, November 12, 2017 7:44 AM
>>>>> To: ozaprs at aprs.net.au
>>>>> Subject: Re: [OZAPRS] ginini-1 up (Glen English VK1XX)
>>>>>
>>>>> Hi Ian
>>> _______________________________________________
>>> OZAPRS mailing list
>>> OZAPRS at aprs.net.au
>>> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>>
>> _______________________________________________
>> OZAPRS mailing list
>> OZAPRS at aprs.net.au
>> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>>
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs