[OZAPRS] development strategy- new MODEM

Scott Evans vk7hse at gmail.com
Sat Dec 30 17:39:57 AEDT 2017


Certainly interested some of the requirements I've most likely got sitting
on the shelf in the radio room!

On Sat., 30 Dec. 2017, 17:11 Glen English VK1XX, <
glenlist at pacificmedia.com.au> wrote:

> 1) beta testers with linux platforms for people that know what "make" is  .
> x86 and ARMv7 and above. uses ALSA (sorry).
>
> (now)
>
> 2) encoder code for off the shelf STM32 discovery eval PCBs (10-20$)
>
> (already works)
>
> 3) encoder code for some PCBs I have that have a micro and a AD9859 DDS
> for direct output on freq (to 300 MHz)
>
> (already works)
>
> 4) production encoder PCB using STM32 and all onboard interfaces. ($35)
>
> 5) provision of prebuilt configured small linux encode/ decode platforms
> (raspberry Pi  , Odroid,  MYS-6ULX-IND)
> and audio +cpntrol + gps interface PCB for order.
>
> and in there , : fix up ratty code and interfaces / dire wolf etc
>
>
>
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.aprs.net.au/pipermail/ozaprs/attachments/20171230/044b8ddc/attachment.html>


More information about the OZAPRS mailing list