[OZAPRS] HF i-Gate using R-Pi, Beaglebone or similar

Roxbyplus roxbyplus at internode.on.net
Sun Feb 15 16:36:57 EST 2015

Take a look at the microsat site. 


Sent from my Samsung GALAXY Note3 on the Telstra 4G network

<div>-------- Original message --------</div><div>From: Rob - VK6LD <vk6ld at sjr.com.au> </div><div>Date:15/02/2015  15:34  (GMT+09:30) </div><div>To: ozaprs at aprs.net.au </div><div>Subject: [OZAPRS] HF i-Gate using R-Pi, Beaglebone or similar </div><div>
</div>Hello All,

Just seeing if anyone has setup or has any info/links on setting up a HF I-Gate using a Raspberry Pi, Beaglebone or similar type of hardware?

The receiver will be an amateur HF transceiver, so no need for an SDR type RX attached to the hardware and not sure about whether to use a sound card style modem or an external TNC?

Hoping to keep the power consumption to a minimum, hence the Raspberry Pi/Beaglebone avenue.

Any advice or pointers would be greatly appreciated.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.aprs.net.au/pipermail/ozaprs/attachments/20150215/f58909e1/attachment.html>

More information about the OZAPRS mailing list