[OZAPRS] Melbourne APRS Repeater

[Warren_Brown]

Hi Tony,

The Digi on Mt Dandenong VK3RMD is currently off air.
There has been some difficulties accessing the site.
It is hoped that the site will be visited in the very near future.

What sort of cavity do you need for 3RYV?

73
Warren.




> -----Original Message-----
> From: ozaprs-bounces at aprs.net.au [mailto:ozaprs-bounces at aprs.net.au] On
> Behalf Of Tony King
> Sent: Friday, 18 March 2011 09:08
> To: ozaprs at aprs.net.au
> Subject: [OZAPRS] Melbourne APRS Repeater
> 
> Hi All,
> Is there still an APRS repeater for 145.175MHz  on Mt Dandenong?   I
> seem to be gating a lot of traffic to the internet from all over the
> Eastern and  S.E. suburbs most of which is direct and not through the
> repeater as it used to go. I noticed similar activity in relation to the
> other Igates closer in to Melbourne.
> 
> Incidentally the VK3RYV-1 digi is still lying about where it is. At the
> moment it is running on a dummy load on my work bench and is getting
> gated onto the inet via VK3API which is running on air about 1 meter
> away. We are still short a cavity to install RYV at its final location.
> I have just been giving it a soak test for a week or so and it will then
> go off again until we can organise a cavity.
>
Regards Tony
> VK3API
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs