[OZAPRS] Reverse Gate HF ( Was Help with port 14580 )
Olsen's Tours and Training
davejust at bigpond.net.au
Sat Jan 15 13:34:21 EST 2011
I have both VHF and UHF in my 4WD and run remote area tours.
I send a link to the people who wish to follow me, one is configured to show aprs.fi with filter -15 the other with -9.
I tell them one is for remote and one for not remote
At home I have an icon for each on the desktop do the wife can click on them at her leisure
David
VK4MDX
On 15/01/2011, at 12:08 PM, VK4UN wrote:
> ?Understand Ian, All makes sense now
>
>
> ----- Original Message ----- From: "Ian Bennett" <ibennett at tpg.com.au>
> To: "Australian APRS Users" <ozaprs at aprs.net.au>
> Sent: Saturday, January 15, 2011 11:00 AM
> Subject: Re: [OZAPRS] Reverse Gate HF ( Was Help with port 14580 )
>
>
>> David,
>> I go 4Wding a bit and I have a number of non-amateur friends and relatives
>> who track our progress.
>> If I went by the recommendations, they would have to track two SSID's as the
>> -9 would "stop" when I ran out of VHF range. A similar thing could occur if
>> they were watching -15.
>> There would be two icons reporting different positions for the same
>> vehicle/unit; very bad.
>> Being ex-Army, "track correlation" means everything to me. It is for this
>> reason I have both TTs configured with -9. This means only one SSID to track
>> and my current position is displayed; irregardless of how that posit made it
>> into the system.
>> For those few who are interested in knowing how a posit got into the
>> system, they will know to look at the path.
>> So why do I run HF and VHF?? HF is the only option when I'm away. When I'm
>> within VHF coverage, I use that because there is more capacity and it leaves
>> the limited HF resources for those that need it.
>> I use the same callsign for voice regardless on what band I'm operating on
>> so why should APRS be any different??
>>
>> Ian
>> VK1IAN-9
>>
>> On Sat, Jan 15th, 2011 at 10:34 AM, VK4UN <vk4un at bigpond.com> wrote:
>>
>>> ?Hi Ian, I am running both VHF and HF in the one Vehicle at the same time,
>>>
>>> VHF with a 710 Kenwood and a IC706 with a Tiny Track on HF and works fine
>>>
>>> Don't understand why you would be seen in 2 different locations if you use
>>>
>>> the same GPS??
>>>
>>> 73's
>>> David VK4UN
>>> ----- Original Message ----- From: "Ian Bennett" <ibennett at tpg.com.au>
>>> To: "Australian APRS Users" <ozaprs at aprs.net.au>
>>> Sent: Saturday, January 15, 2011 9:07 AM
>>> Subject: Re: [OZAPRS] Reverse Gate HF ( Was Help with port 14580 )
>>>
>>>
>>> > That would be me. I run VHF and HF in the same vehicle. Which one is on
>>> is
>>> > determined by my location; I sometimes have both going when in the
>>> fringe
>>> > of
>>> > VHF coverage.
>>> > If I ran two SSIDs, there would be two icons for the same vehicle in
>>> > different locations.
>>> >
>>> > Ian
>>> > VK1IAN
>>> >
>>> >
>>> > On Sat, Jan 15th, 2011 at 9:58 AM, Ray Wells <vk2tv at exemail.com.au>
>>> wrote:
>>> >
>>> >> To complicate matters further, not all travellers use -15 on HF.
>>> >>
>>> >> Ray vk2tv
>>> >>
>>> >> On 15/01/11 09:44, Phillip wrote:
>>> >> > Hi Gordo,
>>> >> > The ( * ) will only function with VK* or
>>> ZL*
>>> >> and
>>> >> > there is no SSID filter ( -15 ) but in saying this if you want to
>>> pass
>>> >> the
>>> >> > -15
>>> >> > HF mobiles then it may be time to educate these mobile stations to
>>> use
>>> >> the
>>> >> > correct symbol as there is a symbol filter.
>>> >> >
>>> >> > s/-> This will pass all House and Car symbols
>>> >> > (primary table)
>>> >> >
>>> >> > Do you only have HF or is this a mixed Igate ?
>>> >> >
>>> >> > Below is the URL for the filter commands
>>> >> >
>>> >> > http://www.aprs2.net/wiki/pmwiki.php/Main/FilterGuide
>>> >> >
>>> >> > It maybe time to ask Roger for a SSID Filter
>>> >> >
>>> >> > 73 Phillip
>>> >> > ZL2TZE
>>> >> >
>>> >> >
>>> >> >
>>> >> > From: Gordon Taylor
>>> >> > To: 'Australian APRS Users'
>>> >> >
>>> >> > Sent: Thursday, January 13, 2011 8:22 PM
>>> >> >
>>> >> > Subject: Re: [OZAPRS] Was Help with port 14580 - now another quiz
>>> >> >
>>> >> > Next question.
>>> >> >
>>> >> > If I want to reverse gate HF travellers out to VHF I.e VK*-15 how >> > can
>>> I
>>> >> do
>>> >> > this with UI-View.
>>> >> >
>>> >> > I can't set the Igate.ini to reverse gate VK*-15 (just doesn't work)
>>>
>>> >> > and
>>> >> you
>>> >> > can't use a * as the first character I.e *-15 so that is out.
>>> >> >
>>> >> > I don't think there is a filter command to use with port 14580 that
>>> >> will
>>> >> > just bring in the VK*-15 traffic enabling me to reverse gate VK*
>>> which
>>> >> would
>>> >> > only be the VK*-15 traffic.
>>> >> >
>>> >> > Any ideas learned ones?
>>> >> >
>>> >> > Regards,
>>> >> > Gordo VK4VP
>>> >> > _______________________________________________
>>> >> > OZAPRS mailing list
>>> >> > OZAPRS at aprs.net.au
>>> >> > http://lists.aprs.net.au/mailman/listinfo/ozaprs
>>> >> >
>>> >>
>>> >> _______________________________________________
>>> >> OZAPRS mailing list
>>> >> OZAPRS at aprs.net.au
>>> >> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>>> >>
>>> >>
>>> >>
>>> >
>>> >
>>> >
>>> > _______________________________________________
>>> > OZAPRS mailing list
>>> > OZAPRS at aprs.net.au
>>> > http://lists.aprs.net.au/mailman/listinfo/ozaprs
>>> >
>>> >
>>>
>>>
>>> _______________________________________________
>>> OZAPRS mailing list
>>> OZAPRS at aprs.net.au
>>> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>>>
>>>
>>>
>>
>>
>>
>> _______________________________________________
>> OZAPRS mailing list
>> OZAPRS at aprs.net.au
>> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>
>
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
More information about the OZAPRS
mailing list