[OZAPRS] Reverse Gate HF ( Was Help with port 14580 )

VK4UN vk4un at bigpond.com
Sat Jan 15 13:08:28 EST 2011


?Understand Ian, All makes sense now


----- Original Message ----- 
From: "Ian Bennett" <ibennett at tpg.com.au>
To: "Australian APRS Users" <ozaprs at aprs.net.au>
Sent: Saturday, January 15, 2011 11:00 AM
Subject: Re: [OZAPRS] Reverse Gate HF ( Was Help with port 14580 )


> David,
>   I go 4Wding a bit and I have a number of non-amateur friends and 
> relatives
> who track our progress.
> If I went by the recommendations, they would have to track two SSID's as 
> the
> -9 would "stop" when I ran out of VHF range. A similar thing could occur 
> if
> they were watching -15.
>   There would be two icons reporting different positions for the same
> vehicle/unit; very bad.
>   Being ex-Army, "track correlation" means everything to me. It is for 
> this
> reason I have both TTs configured with -9. This means only one SSID to 
> track
> and my current position is displayed; irregardless of how that posit made 
> it
> into the system.
>   For those few who are interested in knowing how a posit got into the
> system, they will know to look at the path.
>   So why do I run HF and VHF?? HF is the only option when I'm away. When 
> I'm
> within VHF coverage, I use that because there is more capacity and it 
> leaves
> the limited HF resources for those that need it.
>   I use the same callsign for voice regardless on what band I'm operating 
> on
> so why should APRS be any different??
>
> Ian
> VK1IAN-9
>
> On Sat, Jan 15th, 2011 at 10:34 AM, VK4UN <vk4un at bigpond.com> wrote:
>
>> ?Hi Ian, I am running both VHF and HF in the one Vehicle at the same 
>> time,
>>
>> VHF with a 710 Kenwood and a IC706 with a Tiny Track on HF and works fine
>>
>> Don't understand why you would be seen in 2 different locations if you 
>> use
>>
>> the same GPS??
>>
>> 73's
>> David  VK4UN
>> ----- Original Message ----- 
>> From: "Ian Bennett" <ibennett at tpg.com.au>
>> To: "Australian APRS Users" <ozaprs at aprs.net.au>
>> Sent: Saturday, January 15, 2011 9:07 AM
>> Subject: Re: [OZAPRS] Reverse Gate HF ( Was Help with port 14580 )
>>
>>
>> > That would be me. I run VHF and HF in the same vehicle. Which one is on
>> is
>> > determined by my location; I sometimes have both going when in the
>> fringe
>> > of
>> > VHF coverage.
>> > If I ran two SSIDs, there would be two icons for the same vehicle in
>> > different locations.
>> >
>> > Ian
>> > VK1IAN
>> >
>> >
>> > On Sat, Jan 15th, 2011 at 9:58 AM, Ray Wells <vk2tv at exemail.com.au>
>> wrote:
>> >
>> >> To complicate matters further, not all travellers use -15 on HF.
>> >>
>> >> Ray vk2tv
>> >>
>> >> On 15/01/11 09:44, Phillip wrote:
>> >> > Hi Gordo,
>> >> >                        The (  *  ) will only function with VK*  or
>> ZL*
>> >> and
>> >> > there is no SSID filter  ( -15 ) but in saying this if you want to
>> pass
>> >> the
>> >> > -15
>> >> > HF mobiles then it may be time to educate these mobile stations to
>> use
>> >> the
>> >> > correct symbol as there is a symbol filter.
>> >> >
>> >> >                s/->        This will pass all House and Car symbols
>> >> >                                                  (primary table)
>> >> >
>> >> > Do you only have HF or is this a mixed Igate  ?
>> >> >
>> >> > Below is the URL for the filter commands
>> >> >
>> >> > http://www.aprs2.net/wiki/pmwiki.php/Main/FilterGuide
>> >> >
>> >> > It maybe time to ask Roger for a SSID Filter
>> >> >
>> >> > 73 Phillip
>> >> > ZL2TZE
>> >> >
>> >> >
>> >> >
>> >> > From: Gordon Taylor
>> >> > To: 'Australian APRS Users'
>> >> >
>> >> > Sent: Thursday, January 13, 2011 8:22 PM
>> >> >
>> >> > Subject: Re: [OZAPRS] Was Help with port 14580 - now another quiz
>> >> >
>> >> > Next question.
>> >> >
>> >> > If I want to reverse gate HF travellers out to VHF I.e VK*-15 how 
>> >> > can
>> I
>> >> do
>> >> > this with UI-View.
>> >> >
>> >> > I can't set the Igate.ini to reverse gate VK*-15 (just doesn't work)
>>
>> >> > and
>> >> you
>> >> > can't use a * as the first character I.e *-15 so that is out.
>> >> >
>> >> > I don't think there is a filter command to use with port 14580 that
>> >> will
>> >> > just bring in the VK*-15 traffic enabling me to reverse gate VK*
>> which
>> >> would
>> >> > only be the VK*-15 traffic.
>> >> >
>> >> > Any ideas learned ones?
>> >> >
>> >> > Regards,
>> >> > Gordo VK4VP
>> >> > _______________________________________________
>> >> > OZAPRS mailing list
>> >> > OZAPRS at aprs.net.au
>> >> > http://lists.aprs.net.au/mailman/listinfo/ozaprs
>> >> >
>> >>
>> >> _______________________________________________
>> >> OZAPRS mailing list
>> >> OZAPRS at aprs.net.au
>> >> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>> >>
>> >>
>> >>
>> >
>> >
>> >
>> > _______________________________________________
>> > OZAPRS mailing list
>> > OZAPRS at aprs.net.au
>> > http://lists.aprs.net.au/mailman/listinfo/ozaprs
>> >
>> >
>>
>>
>> _______________________________________________
>> OZAPRS mailing list
>> OZAPRS at aprs.net.au
>> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>>
>>
>>
>
>
>
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
> 




More information about the OZAPRS mailing list