[OZAPRS] Reverse Gate HF ( Was Help with port 14580 )

[Ian Bennett]

David,
   I go 4Wding a bit and I have a number of non-amateur friends and relatives
who track our progress.
If I went by the recommendations, they would have to track two SSID's as the
-9 would "stop" when I ran out of VHF range. A similar thing could occur if
they were watching -15.
   There would be two icons reporting different positions for the same
vehicle/unit; very bad.
   Being ex-Army, "track correlation" means everything to me. It is for this
reason I have both TTs configured with -9. This means only one SSID to track
and my current position is displayed; irregardless of how that posit made it
into the system.
   For those few who are interested in knowing how a posit got into the
system, they will know to look at the path.
   So why do I run HF and VHF?? HF is the only option when I'm away. When I'm
within VHF coverage, I use that because there is more capacity and it leaves
the limited HF resources for those that need it.
   I use the same callsign for voice regardless on what band I'm operating on
so why should APRS be any different??

Ian
VK1IAN-9

On Sat, Jan 15th, 2011 at 10:34 AM, VK4UN <vk4un at bigpond.com> wrote:

> ?Hi Ian, I am running both VHF and HF in the one Vehicle at the same time,
> 
> VHF with a 710 Kenwood and a IC706 with a Tiny Track on HF and works fine
> 
> Don't understand why you would be seen in 2 different locations if you use
> 
> the same GPS??
> 
> 73's
> David  VK4UN
> ----- Original Message ----- 
> From: "Ian Bennett" <ibennett at tpg.com.au>
> To: "Australian APRS Users" <ozaprs at aprs.net.au>
> Sent: Saturday, January 15, 2011 9:07 AM
> Subject: Re: [OZAPRS] Reverse Gate HF ( Was Help with port 14580 )
> 
> 
> > That would be me. I run VHF and HF in the same vehicle. Which one is on
> is
> > determined by my location; I sometimes have both going when in the
> fringe 
> > of
> > VHF coverage.
> > If I ran two SSIDs, there would be two icons for the same vehicle in
> > different locations.
> >
> > Ian
> > VK1IAN
> >
> >
> > On Sat, Jan 15th, 2011 at 9:58 AM, Ray Wells <vk2tv at exemail.com.au>
> wrote:
> >
> >> To complicate matters further, not all travellers use -15 on HF.
> >>
> >> Ray vk2tv
> >>
> >> On 15/01/11 09:44, Phillip wrote:
> >> > Hi Gordo,
> >> >                        The (  *  ) will only function with VK*  or
> ZL*
> >> and
> >> > there is no SSID filter  ( -15 ) but in saying this if you want to
> pass
> >> the
> >> > -15
> >> > HF mobiles then it may be time to educate these mobile stations to
> use
> >> the
> >> > correct symbol as there is a symbol filter.
> >> >
> >> >                s/->        This will pass all House and Car symbols
> >> >                                                  (primary table)
> >> >
> >> > Do you only have HF or is this a mixed Igate  ?
> >> >
> >> > Below is the URL for the filter commands
> >> >
> >> > http://www.aprs2.net/wiki/pmwiki.php/Main/FilterGuide
> >> >
> >> > It maybe time to ask Roger for a SSID Filter
> >> >
> >> > 73 Phillip
> >> > ZL2TZE
> >> >
> >> >
> >> >
> >> > From: Gordon Taylor
> >> > To: 'Australian APRS Users'
> >> >
> >> > Sent: Thursday, January 13, 2011 8:22 PM
> >> >
> >> > Subject: Re: [OZAPRS] Was Help with port 14580 - now another quiz
> >> >
> >> > Next question.
> >> >
> >> > If I want to reverse gate HF travellers out to VHF I.e VK*-15 how can
> I
> >> do
> >> > this with UI-View.
> >> >
> >> > I can't set the Igate.ini to reverse gate VK*-15 (just doesn't work)
> 
> >> > and
> >> you
> >> > can't use a * as the first character I.e *-15 so that is out.
> >> >
> >> > I don't think there is a filter command to use with port 14580 that
> >> will
> >> > just bring in the VK*-15 traffic enabling me to reverse gate VK*
> which
> >> would
> >> > only be the VK*-15 traffic.
> >> >
> >> > Any ideas learned ones?
> >> >
> >> > Regards,
> >> > Gordo VK4VP
> >> > _______________________________________________
> >> > OZAPRS mailing list
> >> > OZAPRS at aprs.net.au
> >> > http://lists.aprs.net.au/mailman/listinfo/ozaprs
> >> >
> >>
> >> _______________________________________________
> >> OZAPRS mailing list
> >> OZAPRS at aprs.net.au
> >> http://lists.aprs.net.au/mailman/listinfo/ozaprs
> >>
> >>
> >>
> >
> >
> >
> > _______________________________________________
> > OZAPRS mailing list
> > OZAPRS at aprs.net.au
> > http://lists.aprs.net.au/mailman/listinfo/ozaprs
> >
> > 
> 
> 
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
> 
> 
>