[OZAPRS] Reverse Gate HF ( Was Help with port 14580 )

[VK4UN]

?Hi Ian, I am running both VHF and HF in the one Vehicle at the same time, 
VHF with a 710 Kenwood and a IC706 with a Tiny Track on HF and works fine

Don't understand why you would be seen in 2 different locations if you use 
the same GPS??

73's
David  VK4UN
----- Original Message ----- 
From: "Ian Bennett" <ibennett at tpg.com.au>
To: "Australian APRS Users" <ozaprs at aprs.net.au>
Sent: Saturday, January 15, 2011 9:07 AM
Subject: Re: [OZAPRS] Reverse Gate HF ( Was Help with port 14580 )


> That would be me. I run VHF and HF in the same vehicle. Which one is on is
> determined by my location; I sometimes have both going when in the fringe 
> of
> VHF coverage.
> If I ran two SSIDs, there would be two icons for the same vehicle in
> different locations.
>
> Ian
> VK1IAN
>
>
> On Sat, Jan 15th, 2011 at 9:58 AM, Ray Wells <vk2tv at exemail.com.au> wrote:
>
>> To complicate matters further, not all travellers use -15 on HF.
>>
>> Ray vk2tv
>>
>> On 15/01/11 09:44, Phillip wrote:
>> > Hi Gordo,
>> >                        The (  *  ) will only function with VK*  or ZL*
>> and
>> > there is no SSID filter  ( -15 ) but in saying this if you want to pass
>> the
>> > -15
>> > HF mobiles then it may be time to educate these mobile stations to use
>> the
>> > correct symbol as there is a symbol filter.
>> >
>> >                s/->        This will pass all House and Car symbols
>> >                                                  (primary table)
>> >
>> > Do you only have HF or is this a mixed Igate  ?
>> >
>> > Below is the URL for the filter commands
>> >
>> > http://www.aprs2.net/wiki/pmwiki.php/Main/FilterGuide
>> >
>> > It maybe time to ask Roger for a SSID Filter
>> >
>> > 73 Phillip
>> > ZL2TZE
>> >
>> >
>> >
>> > From: Gordon Taylor
>> > To: 'Australian APRS Users'
>> >
>> > Sent: Thursday, January 13, 2011 8:22 PM
>> >
>> > Subject: Re: [OZAPRS] Was Help with port 14580 - now another quiz
>> >
>> > Next question.
>> >
>> > If I want to reverse gate HF travellers out to VHF I.e VK*-15 how can I
>> do
>> > this with UI-View.
>> >
>> > I can't set the Igate.ini to reverse gate VK*-15 (just doesn't work) 
>> > and
>> you
>> > can't use a * as the first character I.e *-15 so that is out.
>> >
>> > I don't think there is a filter command to use with port 14580 that
>> will
>> > just bring in the VK*-15 traffic enabling me to reverse gate VK* which
>> would
>> > only be the VK*-15 traffic.
>> >
>> > Any ideas learned ones?
>> >
>> > Regards,
>> > Gordo VK4VP
>> > _______________________________________________
>> > OZAPRS mailing list
>> > OZAPRS at aprs.net.au
>> > http://lists.aprs.net.au/mailman/listinfo/ozaprs
>> >
>>
>> _______________________________________________
>> OZAPRS mailing list
>> OZAPRS at aprs.net.au
>> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>>
>>
>>
>
>
>
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>
>