[OZAPRS] Reverse Gate HF ( Was Help with port 14580 )

Andrew Rich vk4tec at tech-software.net
Sat Jan 15 10:43:47 EST 2011


David,

I have seen this

It depends on when the car TX's

+ HF might TX now
+ VHF might TX a minute later

You have moved since then

UNLESS you are stoppeed

- Andrew -

----- Original Message ----- 
From: "VK4UN" <vk4un at bigpond.com>
To: "Australian APRS Users" <ozaprs at aprs.net.au>
Sent: Saturday, January 15, 2011 9:34 AM
Subject: Re: [OZAPRS] Reverse Gate HF ( Was Help with port 14580 )


> ?Hi Ian, I am running both VHF and HF in the one Vehicle at the same time, 
> VHF with a 710 Kenwood and a IC706 with a Tiny Track on HF and works fine
>
> Don't understand why you would be seen in 2 different locations if you use 
> the same GPS??
>
> 73's
> David  VK4UN
> ----- Original Message ----- 
> From: "Ian Bennett" <ibennett at tpg.com.au>
> To: "Australian APRS Users" <ozaprs at aprs.net.au>
> Sent: Saturday, January 15, 2011 9:07 AM
> Subject: Re: [OZAPRS] Reverse Gate HF ( Was Help with port 14580 )
>
>
>> That would be me. I run VHF and HF in the same vehicle. Which one is on 
>> is
>> determined by my location; I sometimes have both going when in the fringe 
>> of
>> VHF coverage.
>> If I ran two SSIDs, there would be two icons for the same vehicle in
>> different locations.
>>
>> Ian
>> VK1IAN
>>
>>
>> On Sat, Jan 15th, 2011 at 9:58 AM, Ray Wells <vk2tv at exemail.com.au> 
>> wrote:
>>
>>> To complicate matters further, not all travellers use -15 on HF.
>>>
>>> Ray vk2tv
>>>
>>> On 15/01/11 09:44, Phillip wrote:
>>> > Hi Gordo,
>>> >                        The (  *  ) will only function with VK*  or ZL*
>>> and
>>> > there is no SSID filter  ( -15 ) but in saying this if you want to 
>>> > pass
>>> the
>>> > -15
>>> > HF mobiles then it may be time to educate these mobile stations to use
>>> the
>>> > correct symbol as there is a symbol filter.
>>> >
>>> >                s/->        This will pass all House and Car symbols
>>> >                                                  (primary table)
>>> >
>>> > Do you only have HF or is this a mixed Igate  ?
>>> >
>>> > Below is the URL for the filter commands
>>> >
>>> > http://www.aprs2.net/wiki/pmwiki.php/Main/FilterGuide
>>> >
>>> > It maybe time to ask Roger for a SSID Filter
>>> >
>>> > 73 Phillip
>>> > ZL2TZE
>>> >
>>> >
>>> >
>>> > From: Gordon Taylor
>>> > To: 'Australian APRS Users'
>>> >
>>> > Sent: Thursday, January 13, 2011 8:22 PM
>>> >
>>> > Subject: Re: [OZAPRS] Was Help with port 14580 - now another quiz
>>> >
>>> > Next question.
>>> >
>>> > If I want to reverse gate HF travellers out to VHF I.e VK*-15 how can 
>>> > I
>>> do
>>> > this with UI-View.
>>> >
>>> > I can't set the Igate.ini to reverse gate VK*-15 (just doesn't work) 
>>> > and
>>> you
>>> > can't use a * as the first character I.e *-15 so that is out.
>>> >
>>> > I don't think there is a filter command to use with port 14580 that
>>> will
>>> > just bring in the VK*-15 traffic enabling me to reverse gate VK* which
>>> would
>>> > only be the VK*-15 traffic.
>>> >
>>> > Any ideas learned ones?
>>> >
>>> > Regards,
>>> > Gordo VK4VP
>>> > _______________________________________________
>>> > OZAPRS mailing list
>>> > OZAPRS at aprs.net.au
>>> > http://lists.aprs.net.au/mailman/listinfo/ozaprs
>>> >
>>>
>>> _______________________________________________
>>> OZAPRS mailing list
>>> OZAPRS at aprs.net.au
>>> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>>>
>>>
>>>
>>
>>
>>
>> _______________________________________________
>> OZAPRS mailing list
>> OZAPRS at aprs.net.au
>> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>>
>>
>
>
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs 



More information about the OZAPRS mailing list