[OZAPRS] OT2 config

Murray Parnell vk2umz at gmail.com
Fri Apr 22 20:21:23 EST 2011


Hi Mark
I was in Armidale in early march and noticed that the digi there was not
digipeating at all... it was however sending its own beacon out regularly.


On Thu, Apr 21, 2011 at 7:25 AM, Mark Austin <vk2jma at gmail.com> wrote:

> Rick,
> The IGate here in Tamworth can hear the RTM-1, RCC-1 and both KOF-1&2
> digis direct, so no need for a further digi in the path. Adding one
> would just increase the traffic on the network for no benefit.
>
> We have a test digi up near Armidale that JMA-5 can't hear directly,
> it has wide2-1 in the path to get it back via RTM-1 or RCC-1.
>
> One thing that is missing in the config is the PHG data in the beacon
> text, Ray VK2TV has asked I add it (I haven't forgotten Ray!) I just
> need to find, an do some reading re the format required.
>
> CCed the list too, Hope you don't mind.
>
> Regards,
> Mark
>
> On Wed, Apr 20, 2011 at 11:10 PM, Rick Kowalewski <rick at vk6xlr.net> wrote:
> > Hi Mark,
> >
> > Thanks for the file!
> >
> > I notice that the Path is blank.  What is the reason behind that?  I was
> > under the assumption that is should contain a value, like wide2-1, etc.
> >
> > 73,
> > Rick
> >
> > ----------------------------------------------------------------
> >      Rick Kowalewski,  VK6XLR,  Geraldton, WA, Australia
> >     http://www.vk6xlr.net  rick at vk6xlr.net  vk6xlr at qsl.net
> >  "Out of order there is chaos, and out of chaos there is order"
> > ----------------------------------------------------------------
> >
> > On 20/04/2011 19:04, Mark Austin wrote:
> >
> > Rick,
> > Attached is the config file used on VK2RTM-1. VK2KOF-1&2 + VK2RCC-1
> > are configured the same except the digi alias for RCC is set to wide
> > not wide2. RCC will therefor respond to both wide1-x and wide2-x but
> > It's in a very low traffic area. RTM can hear from Newcastle to
> > Armidale and out to RCC so it gets a flogging, and has been up for ~2
> > years I think. Make sure you add your call to the remote access list,
> > then you can play with the config remotely if needed. Let us know if
> > we can assist further.
> > Regards,
> > Mark
> > VK2JMA.
> >
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.aprs.net.au/pipermail/ozaprs/attachments/20110422/80974049/attachment.htm>


More information about the OZAPRS mailing list