[OZAPRS] OT2 config
Mark Austin
vk2jma at gmail.com
Thu Apr 21 07:25:44 EST 2011
Rick,
The IGate here in Tamworth can hear the RTM-1, RCC-1 and both KOF-1&2
digis direct, so no need for a further digi in the path. Adding one
would just increase the traffic on the network for no benefit.
We have a test digi up near Armidale that JMA-5 can't hear directly,
it has wide2-1 in the path to get it back via RTM-1 or RCC-1.
One thing that is missing in the config is the PHG data in the beacon
text, Ray VK2TV has asked I add it (I haven't forgotten Ray!) I just
need to find, an do some reading re the format required.
CCed the list too, Hope you don't mind.
Regards,
Mark
On Wed, Apr 20, 2011 at 11:10 PM, Rick Kowalewski <rick at vk6xlr.net> wrote:
> Hi Mark,
>
> Thanks for the file!
>
> I notice that the Path is blank. What is the reason behind that? I was
> under the assumption that is should contain a value, like wide2-1, etc.
>
> 73,
> Rick
>
> ----------------------------------------------------------------
> Rick Kowalewski, VK6XLR, Geraldton, WA, Australia
> http://www.vk6xlr.net rick at vk6xlr.net vk6xlr at qsl.net
> "Out of order there is chaos, and out of chaos there is order"
> ----------------------------------------------------------------
>
> On 20/04/2011 19:04, Mark Austin wrote:
>
> Rick,
> Attached is the config file used on VK2RTM-1. VK2KOF-1&2 + VK2RCC-1
> are configured the same except the digi alias for RCC is set to wide
> not wide2. RCC will therefor respond to both wide1-x and wide2-x but
> It's in a very low traffic area. RTM can hear from Newcastle to
> Armidale and out to RCC so it gets a flogging, and has been up for ~2
> years I think. Make sure you add your call to the remote access list,
> then you can play with the config remotely if needed. Let us know if
> we can assist further.
> Regards,
> Mark
> VK2JMA.
>
More information about the OZAPRS
mailing list