Hi Mark<br>I was in Armidale in early march and noticed that the digi there was not digipeating at all... it was however sending its own beacon out regularly.<br><br><br><div class="gmail_quote">On Thu, Apr 21, 2011 at 7:25 AM, Mark Austin <span dir="ltr"><<a href="mailto:vk2jma@gmail.com">vk2jma@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">Rick,<br>
The IGate here in Tamworth can hear the RTM-1, RCC-1 and both KOF-1&2<br>
digis direct, so no need for a further digi in the path. Adding one<br>
would just increase the traffic on the network for no benefit.<br>
<br>
We have a test digi up near Armidale that JMA-5 can't hear directly,<br>
it has wide2-1 in the path to get it back via RTM-1 or RCC-1.<br>
<br>
One thing that is missing in the config is the PHG data in the beacon<br>
text, Ray VK2TV has asked I add it (I haven't forgotten Ray!) I just<br>
need to find, an do some reading re the format required.<br>
<br>
CCed the list too, Hope you don't mind.<br>
<br>
Regards,<br>
Mark<br>
<br>
On Wed, Apr 20, 2011 at 11:10 PM, Rick Kowalewski <<a href="mailto:rick@vk6xlr.net">rick@vk6xlr.net</a>> wrote:<br>
> Hi Mark,<br>
><br>
> Thanks for the file!<br>
><br>
> I notice that the Path is blank. What is the reason behind that? I was<br>
> under the assumption that is should contain a value, like wide2-1, etc.<br>
><br>
> 73,<br>
> Rick<br>
><br>
> ----------------------------------------------------------------<br>
> Rick Kowalewski, VK6XLR, Geraldton, WA, Australia<br>
> <a href="http://www.vk6xlr.net" target="_blank">http://www.vk6xlr.net</a> <a href="mailto:rick@vk6xlr.net">rick@vk6xlr.net</a> <a href="mailto:vk6xlr@qsl.net">vk6xlr@qsl.net</a><br>
> "Out of order there is chaos, and out of chaos there is order"<br>
> ----------------------------------------------------------------<br>
><br>
> On 20/04/2011 19:04, Mark Austin wrote:<br>
><br>
> Rick,<br>
> Attached is the config file used on VK2RTM-1. VK2KOF-1&2 + VK2RCC-1<br>
> are configured the same except the digi alias for RCC is set to wide<br>
> not wide2. RCC will therefor respond to both wide1-x and wide2-x but<br>
> It's in a very low traffic area. RTM can hear from Newcastle to<br>
> Armidale and out to RCC so it gets a flogging, and has been up for ~2<br>
> years I think. Make sure you add your call to the remote access list,<br>
> then you can play with the config remotely if needed. Let us know if<br>
> we can assist further.<br>
> Regards,<br>
> Mark<br>
> VK2JMA.<br>
><br>
_______________________________________________<br>
OZAPRS mailing list<br>
<a href="mailto:OZAPRS@aprs.net.au">OZAPRS@aprs.net.au</a><br>
<a href="http://lists.aprs.net.au/mailman/listinfo/ozaprs" target="_blank">http://lists.aprs.net.au/mailman/listinfo/ozaprs</a><br>
</blockquote></div><br>