[OZAPRS] Signalink USB weak receive audio
David and Justine Olsen
davejust at bigpond.net.au
Wed May 19 20:20:25 EST 2010
I've changed to a Signalink USB recently to eliminate the complicated
MixW and Port emulation I've been using to date, but I find the Audio
from the SignalinkUSB is way too low even with everything cranked up
to the maximum.
I have an Icom IC703 and Tokyo Hipower Linear running at about 50W.
The Signalink is hooked up in the usual way to a PC running Packet
Engine Pro and UIview32.
Even with the RX knob on the Signalink at max, and the sound card
volume at max under windows, I can not decode any stations, but I can
with the a mono cable between radio phone socket and mic in on the PC.
Packet engine pro shows the audio levels to be way lower with the
SignallinkUSB
any ideas?
David
VK4MDX
More information about the OZAPRS
mailing list