[OZAPRS] Signalink USB weak receive audio

[Steven Heimann]

Morning David

I have one and have found it great.  If there is not enough adjustment
on the Rx knob there is a jumper to increase the drive.  Refer pages 5 &
6 of the manual.

Regards
Steven


On Wed, 2010-05-19 at 20:20 +1000, David and Justine Olsen wrote:
> I've changed to a Signalink USB recently to eliminate the complicated   
> MixW and Port emulation I've been using to date, but I find the Audio  
> from the SignalinkUSB is way too low even with everything cranked up  
> to the maximum.
> 
> I have an Icom IC703 and Tokyo Hipower Linear running at about 50W.
> The Signalink is hooked up in the usual way to a PC running Packet  
> Engine Pro and UIview32.
> Even with the RX knob on the Signalink at max, and the sound card  
> volume at max under windows, I can not decode any stations, but I can  
> with the a mono cable between radio phone socket and mic in on the PC.
> 
> Packet engine pro shows the audio levels to be way lower with the  
> SignallinkUSB
> 
> any ideas?
> 
> David
> VK4MDX
> 
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs