[OZAPRS] Alinco 635 TNC

[Steve Sharp]

My understanding (and feel free to correct me if I've missed the point) is
that when mobile I have the CTCSS enabled on Tx and Rx, that way my radio is
silent and I don't hear any packets - unless another mobile doing the same
is in range and has tones enabled - we hear each others packets and can QSY
for a yarn.

The manner it is not working is - the beacons are not being relayed to the
Internet and it is not sending location packets.

I have googled the tasco modem and have found some info which I'll sort
through and see if that helps me...

73 Steve VK2POO

On 2 August 2010 20:38, Richard Murnane <Richard.Murnane at internode.on.net>wrote:

> Hi Steve,
>
> > Had a go at re-configuring from memory and the TNC docs (it's a Tasco
> > based TNC), but have not got it working.
>
> You haven't said precisely the manner in which it's not working, but
> one thing caught my eye:
>
> > > BTEXT    VK2POO listening 145.175MHZ 91.5Hz CTCSS
>
> Your beacon text can be anything you like, of course, but am I to
> understand that you are using a tone squelch on receive? I'm not aware
> of APRS node sending out such a tone.
>
> 73 Richard VK2SKY
>
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.aprs.net.au/pipermail/ozaprs/attachments/20100802/e4fb4751/attachment.htm