[OZAPRS] APRS receiver setting
Darryl Smith
Darryl at Radio-Active.Net.Au
Fri Nov 27 10:55:09 EST 2009
The definitive article can be found on febo.com
http://www.febo.com/packet/layer-one/transmit.html
Darryl
---------
Darryl Smith, VK2TDS POBox 169 Ingleburn NSW 2565 Australia
Mobile Number 0412 929 634 [+61 4 12 929 634 Int] - 02 9618 6459
<http://www.radio-active.net.au/blog/> www.radio-active.net.au/blog/ - <http://www.radio-active.net.au/web/tracking/> www.radio-active.net.au/web/tracking/
From: ozaprs-bounces at aprs.net.au [mailto:ozaprs-bounces at aprs.net.au] On Behalf Of Scott Evans
Sent: Friday, 27 November 2009 10:53 AM
To: Australian APRS Users
Subject: Re: [OZAPRS] APRS receiver setting
I've always used the setting of 3KHz (on VHF) as some Philips PRM series clips anything above 3.5/5KHz but the your mileage may vary! but if you have the means to measure what is happening around you then maybe match that.
--
Scott Evans <scott at vk7hse.hobby-site.org>
-- This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.aprs.net.au/pipermail/ozaprs/attachments/20091127/73f7c91b/attachment.htm
More information about the OZAPRS
mailing list