[OZAPRS] APRS receiver setting
Scott Evans
scott at vk7hse.hobby-site.org
Fri Nov 27 10:53:04 EST 2009
I've always used the setting of 3KHz (on VHF) as some Philips PRM series
clips anything above 3.5/5KHz but the your mileage may vary! but if you
have the means to measure what is happening around you then maybe match
that.
--
Scott Evans <scott at vk7hse.hobby-site.org>
--
This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed.
If you have received this email in error please notify the system manager. This message contains confidential information and is intended only for the
individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately
by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. If you are not the intended recipient you are notified
that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.aprs.net.au/pipermail/ozaprs/attachments/20091127/0f1a06a9/attachment.htm
More information about the OZAPRS
mailing list