[OZAPRS] 20 m freq

Ray Wells vk2tv at exemail.com.au
Mon Jan 12 16:55:37 EST 2009


As a follow up to my previous, VK4JRC was heard on my 20m port at near 
midday (NSW time) today, 12th Jan.

Ray vk2tv

Ray Wells wrote:
> Michael,
>
> Mine should be working but it's not heard anyone yet. It's turned on 
> and ready and is on 14105.09 USB using 1600/1800Hz tones.
>
> I don't know the tone pair used by the tt3+. If they are the same as 
> mine 14105.09 should be close to the money. If they are different 
> you'll need an offset.
>
> If you used 10147.600 on 30m you won't need an offset of 20m. If your 
> dial reading was other than 10147.600 on 30m, apply that frequency 
> difference to 20m.
>
> Ray vk2tv
>
> Michael wrote:
>> Hello all,
>> Is there a APRS gate working oh 20 m now? if so what frequency should 
>> I use, using a TT3+ into the IC-706
>>
>> About to drive a few thousand Km back home next week and would like 
>> something working, cannot use 10 meg as the Terlin antenna got a 
>> broken wire below the 20m tap :-( (Was wondering why my location was 
>> not updating all that often on the way down)
>>
>> Thanks for a great service
>>
>> 73 from Michael
>> VK6BHY
>>
>>
>> _______________________________________________
>> Ozaprs mailing list
>> Ozaprs at aprs.net.au
>> http://aprs.net.au/mailman/listinfo/ozaprs
>>
>
> _______________________________________________
> Ozaprs mailing list
> Ozaprs at aprs.net.au
> http://aprs.net.au/mailman/listinfo/ozaprs
>

_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs



More information about the Ozaprs mailing list