[OZAPRS] 20 m freq

[Ray Wells]

Thanks, David

David and Justine Olsen wrote:
> I am awaiting a TT4. Once I get that I will begin testing so hopefully 
> you should hear me
>
> On 12 Jan 2009, at 06:26, Ray Wells wrote:
>
>> Michael,
>>
>> Mine should be working but it's not heard anyone yet. It's turned on 
>> and ready and is on 14105.09 USB using 1600/1800Hz tones.
>>
>> I don't know the tone pair used by the tt3+. If they are the same as 
>> mine 14105.09 should be close to the money. If they are different 
>> you'll need an offset.
>>
>> If you used 10147.600 on 30m you won't need an offset of 20m. If your 
>> dial reading was other than 10147.600 on 30m, apply that frequency 
>> difference to 20m.
>>
>> Ray vk2tv
>>
>> Michael wrote:
>>> Hello all,
>>> Is there a APRS gate working oh 20 m now? if so what frequency 
>>> should I use, using a TT3+ into the IC-706
>>>
>>> About to drive a few thousand Km back home next week and would like 
>>> something working, cannot use 10 meg as the Terlin antenna got a 
>>> broken wire below the 20m tap :-( (Was wondering why my location was 
>>> not updating all that often on the way down)
>>>
>>> Thanks for a great service
>>>
>>> 73 from Michael
>>> VK6BHY
>>>
>>>
>>> _______________________________________________
>>> Ozaprs mailing list
>>> Ozaprs at aprs.net.au
>>> http://aprs.net.au/mailman/listinfo/ozaprs
>>>
>>
>> _______________________________________________
>> Ozaprs mailing list
>> Ozaprs at aprs.net.au
>> http://aprs.net.au/mailman/listinfo/ozaprs
>
> _______________________________________________
> Ozaprs mailing list
> Ozaprs at aprs.net.au
> http://aprs.net.au/mailman/listinfo/ozaprs
>

_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs