[OZAPRS] 20 m freq

[David and Justine Olsen]

I am awaiting a TT4. Once I get that I will begin testing so  
hopefully you should hear me

On 12 Jan 2009, at 06:26, Ray Wells wrote:

> Michael,
>
> Mine should be working but it's not heard anyone yet. It's turned  
> on and ready and is on 14105.09 USB using 1600/1800Hz tones.
>
> I don't know the tone pair used by the tt3+. If they are the same  
> as mine 14105.09 should be close to the money. If they are  
> different you'll need an offset.
>
> If you used 10147.600 on 30m you won't need an offset of 20m. If  
> your dial reading was other than 10147.600 on 30m, apply that  
> frequency difference to 20m.
>
> Ray vk2tv
>
> Michael wrote:
>> Hello all,
>> Is there a APRS gate working oh 20 m now? if so what frequency  
>> should I use, using a TT3+ into the IC-706
>>
>> About to drive a few thousand Km back home next week and would  
>> like something working, cannot use 10 meg as the Terlin antenna  
>> got a broken wire below the 20m tap :-( (Was wondering why my  
>> location was not updating all that often on the way down)
>>
>> Thanks for a great service
>>
>> 73 from Michael
>> VK6BHY
>>
>>
>> _______________________________________________
>> Ozaprs mailing list
>> Ozaprs at aprs.net.au
>> http://aprs.net.au/mailman/listinfo/ozaprs
>>
>
> _______________________________________________
> Ozaprs mailing list
> Ozaprs at aprs.net.au
> http://aprs.net.au/mailman/listinfo/ozaprs

_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs