[OZAPRS] 20 m freq
Ray Wells
vk2tv at exemail.com.au
Mon Jan 12 07:26:00 EST 2009
Michael,
Mine should be working but it's not heard anyone yet. It's turned on and
ready and is on 14105.09 USB using 1600/1800Hz tones.
I don't know the tone pair used by the tt3+. If they are the same as
mine 14105.09 should be close to the money. If they are different you'll
need an offset.
If you used 10147.600 on 30m you won't need an offset of 20m. If your
dial reading was other than 10147.600 on 30m, apply that frequency
difference to 20m.
Ray vk2tv
Michael wrote:
> Hello all,
> Is there a APRS gate working oh 20 m now? if so what frequency should
> I use, using a TT3+ into the IC-706
>
> About to drive a few thousand Km back home next week and would like
> something working, cannot use 10 meg as the Terlin antenna got a
> broken wire below the 20m tap :-( (Was wondering why my location was
> not updating all that often on the way down)
>
> Thanks for a great service
>
> 73 from Michael
> VK6BHY
>
>
> _______________________________________________
> Ozaprs mailing list
> Ozaprs at aprs.net.au
> http://aprs.net.au/mailman/listinfo/ozaprs
>
_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs
More information about the Ozaprs
mailing list