[OZAPRS] Re: digipeated iss beacon

Geoff geoff at gatwards.org
Thu Mar 13 20:30:35 EST 2008


It's probably a bug in the OLDER version of APRSD  ;-)

An IGate should NEVER transmit back to the internet something it transmitted
to RF, as this causes loops in the network which is very bad.  99% of all
IGate capable software has been fixed to correct this bug, but in your case
you want to use the bug to your advantage :-)   

Geoff  VK2XJG

-----Original Message-----
From: ozaprs-bounces at aprs.net.au [mailto:ozaprs-bounces at aprs.net.au] On
Behalf Of martin diggens
Sent: Thursday, March 13, 2008 5:49 PM
To: Australian APRS Users
Subject: Re: [OZAPRS] Re: digipeated iss beacon

Hi Ian
   
  thanks for the reply. Yes these beacons are received by vk3jtm-5 who
operates a rx only sgate. These beacons are forwarded by him to the net and
they appear on the maps. My station also receives them and forwards them on
to the net but they don't seem to end up on the maps. I never see my posit
on a map which was forwarded by my station as happens with vk8zma's beacons.
So I am wondering if it is simply a bug in the newer version of aprsd?
   
  It is a puzzlement.
   
  Cheers
  Martin

Ian Mills <imills at awa.com.au> wrote:
  
Hi Martin,

I can see some of your beacons on the net via ARRIS:

2008-03-11 22:14:18 EST:
VK6MJ-6>APRS,RS0ISS-4*,SGATE,WIDE,OF78WC,qAo,VK3JTM-5:!3153.27S/11551.18E`
VK6MJ_SGATE_vk6mj at yahoo.com 
2008-03-11 23:50:18 EST:
VK6MJ-6>APRS,RS0ISS-4*,SGATE,WIDE,OF78WC,qAo,VK3JTM-5:!3153.27S/11551.18E`
VK6MJ_SGATE_vk6mj at yahoo.com

This was from http://aprs.fi/ which I find to be better than findu

Cheers
Ian
vk2him


>Hi All
> 
> I am running an APRS Sgate here in VK6 using aprsd-2.2.5-15. All is
> working quite nicely with the exception of my own beacons when received
> back from rs0iss-4. I have set the config file to allow my own
> beacons to be forwarded on to the net and this in fact happens. However
> they don't seem to go anywhere. I don't see them on ariss.net or
> findu.com. I notice Mike VK8ZMA who uses an earlier version aprsd-2.5.5-13
is
> successful in sending his beacons on to ariss.net etc. Would anyone know
if
> this is a problem with the newer version of aprsd or is there perhaps a
> setting downstream on the net which needs to be set?
> 
> Any thoughts?
> 
> Cheers for now
> Martin




AWA Limited

**********************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the system manager.
**********************************************************************
_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs


 	      
---------------------------------
Never miss a thing.   Make Yahoo your homepage.
_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs



_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs



More information about the Ozaprs mailing list