[OZAPRS] information on APRS in Australia.

[zlscanners]

Yes Relay -- Wide--- and CQ all work via ISS   today anyway


*** Port1 with PK232 On COM6: 144.575Mhz 1200baud
*** Port2 with PK232 On COM5: 145.800Mhz 1200baud

15:13:01R RS0ISS-3>P0PPP0,SGATE,WIDE Port=2 <UI Len=32>:
'vX
l 
'/]APRS/BBS & PACKET ON.

15:15:04R RS0ISS-3>P0PPP0,SGATE,WIDE Port=2 <UI Len=32>:
'vX
l 
'/]APRS/BBS & PACKET ON.

15:15:12R RS0ISS-3>ID Port=2 <UI Len=8>:
RS0ISS/R

15:15:47T ZL1KM-6>APU36Y,RS0ISS-3,SGATE,WIDE Port=2 <UI Len=18>:
 >RF72NG/- via ISS

15:15:50R ZL1KM-6>APU36Y,RS0ISS-3*,SGATE,WIDE Port=2 <UI Len=18>:
 >RF72NG/- via ISS

15:16:06R RS0ISS-3>P0PPP0,SGATE,WIDE Port=2 <UI Len=32>:
'vX
l 
'/]APRS/BBS & PACKET ON.

15:16:11T ZL1KM-6>APU36Y,RELAY,SGATE,WIDE Port=2 <UI Len=18>:
 >RF72NG/- via ISS

15:16:15R ZL1KM-6>APU36Y,RS0ISS-3*,SGATE,WIDE Port=2 <UI Len=18>:
 >RF72NG/- via ISS

15:16:31T ZL1KM-6>APU36Y,WIDE,SGATE,WIDE Port=2 <UI Len=18>:
 >RF72NG/- via ISS

15:16:44R ZL1KM-6>APU36Y,RS0ISS-3*,SGATE,WIDE Port=2 <UI Len=18>:
 >RF72NG/- via ISS

15:17:07R RS0ISS-3>P0PPP0,SGATE,WIDE Port=2 <UI Len=32>:
'vX
l 
'/]APRS/BBS & PACKET ON.




Richard Hoskin wrote:
> Hi Mike,
>
> Sorry I made a mistake with the ISS path. It should be
R0ISS-3,SGATE,WIDE
>
> I have read but not confirmed that ISS will accept a path of RELAY. So
you
> may be able to use RELAY,WIDE through ISS if the Ground Station is
connected
> directly to APRS-IS (I know that one VK Ground Station is). This would
solve
> your problem. Probably best to confirm if the path works with an email
to
> the US APRS Sig or AMSAT list. Or try it your self if possible.
>
> Cheers
> Richard
> VK3JFK
>
>
>> -----Original Message-----
>> From: Mike Zwingl oe3mzc [mailto:oe3mzc at oevsv.at]
>> Sent: Monday, 19 June 2006 9:09 PM
>> To: vk3jfk at amsat.org; VK / ZL APRS Users
>> Cc: oe3msu (Kabsi2)
>> Subject: Re: [OZAPRS] information on APRS in Australia.
>>
>> Richard,
>> tnx fer ur info.
>> However I see a problem with the different digi paths necessary:
>> on 10MHz HF: GATE, WIDE  and for testing correct QRG-setting I would
need
>> to
>> test via ECHO, etc..
>> with ISS you suggest: SGATE,WIDE
>> but on VHF 145.175 path setting would be RELAY, WIDE
>>
>> I am using a TinyTrak3 and I have only 2 settings available in the
memory.
>> Since I am not sure to understand all details of the DIGI-PATH command,
>> let
>> me ask the group: What would you suggest to use, if I want to leave a
>> reliable track during my travel from Perth to Darwin and Alice?
>> I guess around cities it would be preferable to use VHF-APRS on 145.175
>> and
>> in between and in bush I would use 10MHz HF and eventually ISS. But to
my
>> understanding it would require some reprogramming of the TinyTrak3
using a
>> Laptop and RS232.
>> Any hints?
>> vy 73 de Mike
>> OE3MZC  or VK3FPF/6
>>
_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs