[OZAPRS] SveeSix mounting/power

[Richard Hoskin]

The RAM BB @ 3V works fine below spec.

Cheers
Richard
VK3JFK

-----Original Message-----
From: ozaprs-bounces at aprs.net.au [mailto:ozaprs-bounces at aprs.net.au] On
Behalf Of Hamish Moffatt
Sent: Saturday, 19 August 2006 10:36 AM
To: ozaprs at aprs.net.au
Subject: Re: [OZAPRS] SveeSix mounting/power


Thanks Richard and Gavin for the comments.
I haven't replaced the 9V in ages so that's no doubt the problem.

I don't necessarily run the engine for more than half an hour per day so
I'd better not go with that approach!

Re: RAM backup voltage, if that needs to be at least +3.5V, how does it
work with a 3V lithium or AAs? Or does it just work despite being out of
spec?

cheers
Hamish

_______________________________________________
Ozaprs mailing list
Ozaprs at aprs.net.au
http://aprs.net.au/mailman/listinfo/ozaprs
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://second.aprs.net.au/pipermail/ozaprs/attachments/20060819/6f660d5c/attachment.htm