[OZAPRS] VK5EX-4
Andrew Rich
vk4tec at tech-software.net
Fri May 13 05:50:06 EST 2005
I stand corrected.
See you read part of a spec and it bites you.
Ok If Tony sees it and Brian does not, and Brians packet is ok,
what setting in UI-View is doing it ?
Cheers
-----Original Message-----
From: Robert Bruninga [mailto:bruninga at usna.edu]
Sent: Thursday, 12 May 2005 11:35 PM
To: bbeamish at bigpond.net.au; ozaprs at marconi.ics.mq.edu.au;
vk4tec at tech-software.net; Alan at wallace.net.nz
Cc: vk8lm at dodo.com.au
Subject: RE: [OZAPRS] VK5EX-4
The "G" character is valid and is the Overlay
Character.
>>> vk4tec at tech-software.net 5/11/2005 5:00:56 PM >>>
>This packet is not legal in the APRS Spec.
=3407.98SG14043.43E& DIGI_NED: APRS HF/VHF Gate...
> "G" is not valid, this is the place holder for the "SYMBOL TABLE"
> It must be either a "/" or a "\"
*or* an overlay character for those symbols that
allow it. Such symbols are the GATE symbol. But
overlaying G is kind of meaningless. The preferred
overlay is "H" for HF, "I" for Igates, "S" for satellites
gates, etc...
Bob
_______________________________________________
ozaprs mailing list
ozaprs at marconi.ics.mq.edu.au
http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs
More information about the Ozaprs
mailing list