[OZAPRS] VK5EX-4

[Robert Bruninga]

The "G" character is valid and is the Overlay
Character.

>>> vk4tec at tech-software.net 5/11/2005 5:00:56 PM >>>
>This packet is not legal in the APRS Spec.
=3407.98SG14043.43E& DIGI_NED: APRS HF/VHF Gate...
> "G" is not valid, this is the place holder for the "SYMBOL TABLE"
> It must be either a "/" or a "\"

*or* an overlay character for those symbols that
allow it.  Such symbols are the GATE symbol.  But
overlaying G is kind of meaningless.  The preferred
overlay is "H" for HF, "I" for Igates, "S" for satellites
gates, etc...

Bob

_______________________________________________
ozaprs mailing list
ozaprs at marconi.ics.mq.edu.au
http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs