[OZAPRS] How to Feed into the APRS Servers?
vk3jfk at amsat.org
Fri Feb 25 11:50:42 EST 2005
I'm with Andrew on this.
If your looking for an easy way to get 145.800 on to ARPS-IS or/and out to
another RF channel use UI-View32 and AGW. I use this for setup for PCSAT.
AGW will not talk to aprsd. Though you can use aprsd to talk to a local
> -----Original Message-----
> From: ozaprs-bounces at marconi.ics.mq.edu.au [mailto:ozaprs-
> bounces at marconi.ics.mq.edu.au] On Behalf Of Chris Hill
> Sent: Friday, 25 February 2005 1:22 AM
> To: ozaprs at marconi.ics.mq.edu.au
> Subject: [OZAPRS] How to Feed into the APRS Servers?
> Hi All,
> I have a radio listening to 145.800MHz, feeding a TNC (MFJ1270), run as
> RS-232 into a Windows 2000 machine that is left running 24 hours a day.
> On that machine, I have the SV2AGW AGW Packet Engine (AGWPE) running.
> I have successfully been using UI-VIEW on my laptop PC, connected to the
> AGWPE, to gate traffic received via ISS, out to the internet APRS
> servers... until yesterday.
> Yesterday, my laptop PC's fan failed, causing the PC to instantly shut
> down. Time for a new laptop, while I get a new fan assembly for the old
> In the meantime, I would like to configure the whole setup to be
> self-contained on the Windows 2000 machine.
> What would people recommend? Should I simply download and configure
> UIVIEW onto the Windows 2000 machine? Or is there a better way?
> (I also have a Fedora Core 2 server sitting in the same rack, so should
> I just run aprsd instead? Can aprsd connect to the AGWPE service?)
> Any suggestions gratefully received!
> Chris vk6kch
> ozaprs mailing list
> ozaprs at marconi.ics.mq.edu.au
ozaprs mailing list
ozaprs at marconi.ics.mq.edu.au
More information about the Ozaprs