[OZAPRS] Victorian HF Gateways

[Trina And Ross]

Mike, tone frequency's I have no idea, I can tell you it is a KamPlus that
is being used, anyhow I thought the easiest way to tune would be to tune
your vfo to whatever freq gives you the widest spacing on your leds on
your tnc, guess that's how I would do it.
 
For Andrew's benefit the 40m gateway is only running 25W, the 30m gateway
runs 100W, I have a interference problem on 40m with my crap Telstra
Commander Phone System, anymore than 25W and the phones play wonderful
tunes in line with any transmissions on 40m.
 
Ross
 

----- Original Message ----- 
From: Richter, Mike W <mailto:Michael.Richter at team.telstra.com>  
To: ozaprs at marconi.ics.mq.edu.au 
Sent: Wednesday, 10 December 2003 10:27 PM
Subject: RE: [OZAPRS] Victorian HF Gateways

7.039 LSB - but using what Tone frequencies ?
 
Mike 

 

 -----Original Message-----
From: Trina And Ross [mailto:rkeogh at bigpond.net.au]
Sent: Wednesday, 10 December 2003 09:59 pm
To: ozaprs at marconi.ics.mq.edu.au
Subject: [OZAPRS] Victorian HF Gateways



Now that VK3MY-1 is back up and running under the new Callsign of
VK3RMD-1, I have been able to put the 40m gateway back on air, both 30m
and 40m gateways are now operational currently the 40m gateway is on
7.039lsb.
 
 
Ross VK3MY



  _____  




_______________________________________________
ozaprs mailing list
ozaprs at marconi.ics.mq.edu.au
http://marconi.ics.mq.edu.au/cgi-bin/mailman/listinfo/ozaprs


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://second.aprs.net.au/pipermail/ozaprs/attachments/20031211/21e92268/attachment.htm 
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: ATT05221.txt
Url: http://second.aprs.net.au/pipermail/ozaprs/attachments/20031211/21e92268/attachment.txt