[OZAPRS] New Proposed APRS Digi for Adelaide - VK5RSB coming to life

[Tony Hunt]

 Grant.  Good news.

I can see it on the map. I will send you the documentation I have on UiDigis
as a Pmail. I think its no longer available online.

 
Tony VK5AH
 
 

-----Original Message-----

Date: Sun, 24 May 2020 09:37:36 +0930
From: "Grant Willis" <vk5gr at bigpond.com>
To: "'Australian APRS Users'" <ozaprs at aprs.net.au>
Subject: Re: [OZAPRS] New Proposed APRS Digi for Adelaide - VK5RSB
	coming to life
Message-ID: <034901d6315f$54e8b7c0$feba2740$@com>
Content-Type: text/plain;	charset="UTF-8"

Folks,

Well after a 2 year delay I have finally returned to completing the VK5RSB
APRS digipeater for Adelaide on 145.175. It is on test from my place for the
next a couple of weeks - currently temporarily wired into my Kenwood TM-281
running low power but I will migrate it onto the TAIT 8110 in the next week
or so. 

So if people see VK5RSB running around on air let me know! (if you see it
mis-behave also let me know!)

Tony 5AH - do you have a manual for the TNC software? I plugged your RSB
eprom you gave me into the Tiny-2 this morning and breathed a sigh of relief
that the TNC still worked. Now I am wanting to know what configs it can take
over the air (if any are even needed) or whether there is anything else I
need to do to it? Looking from my car it seems to just be working.  I still
have audio etc to sort out but will do that against the Tait.

Regards,
Grant VK5GR