[OZAPRS] pre-built aprs igate image

[Justin Albury]

You could also try this version from Owen Duffy, he spent a lot of time correcting a few issues.  Well worth the read and trying it out.

https://owenduffy.net/blog/?p=2594


Justin Albury
J Albury Communications
justin at jacomms.com<mailto:justin at jacomms.com>
0417246791

-----------------------------------------------------------------
This email, and any attachments are for the use of the intended
recipient(s) and may contain confidential/privileged information.
If you have received this email in error, please notify the sender
immediately and then delete it. If you are not the intended recipient,
you must not copy, disclose or distribute its contents to any other
person. We do not accept any liability in connection with transmitting,
unauthorised access to, or viruses in this email and its attachments.
This notice should not be removed.
----------------------------------------------------------------------------------

From: OZAPRS <ozaprs-bounces at aprs.net.au> On Behalf Of Scott Evans
Sent: Monday, 6 July 2020 2:46 PM
To: Australian APRS Users <ozaprs at aprs.net.au>
Subject: Re: [OZAPRS] pre-built aprs igate image

I assume that you are going to be using APRX as the igate software?
Save yourself time and frustration and download the latest PiOS (without GUI) and then "sudo apt install aprx" and take a look at the aprx.conf there's an example of how to setup a rx only gate in that.
Cheers
________________________________
From: OZAPRS <ozaprs-bounces at aprs.net.au<mailto:ozaprs-bounces at aprs.net.au>> on behalf of Norm McMillan <vk3xci at gmail.com<mailto:vk3xci at gmail.com>>
Sent: Monday, July 6, 2020 2:25:06 PM
To: Australian APRS Users <ozaprs at aprs.net.au<mailto:ozaprs at aprs.net.au>>
Subject: [OZAPRS] pre-built aprs igate image

Folks,
I've tried several times to download the image from "qso365" and unzip (7-Zip) and I keep getting a "CRC failed. File is broken message". Anyone have a good copy? SD or USB stick by snail mail is OK.

It's been a long time between Linux'es and I'm struggling to get an Rx only iGate going from scratch using RPi 3B+, Direwolf and rtl_fm.

Given the ubiquity of .conf files in linux you'd think by now someone would have come up with a utility instead of paging through lines on the console. (end of rant 😜)

norm vk3xci

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.aprs.net.au/pipermail/ozaprs/attachments/20200706/9b654f76/attachment-0001.htm>