[OZAPRS] VK1RGI-1 config changes

[Graeme]

Hello Glen,

Notwithstanding trying to stem the propagation of wide2-2 messages into 
areas far beyond what is thought useful,  not digi-peating wide1 from RHR 
would prevent mobile stations from knowing the location of other mobile 
stations that are travelling in the adjoining areas of cover.

Graeme 2HFG

-----Original Message----- 
From: glen english LIST
Sent: Friday, January 10, 2020 9:42 PM
To: ozaprs at aprs.net.au
Subject: Re: [OZAPRS] VK1RGI-1 config changes

Hi Graeme

RGI blocks all UI traffic out of RHR. carte blanch. connected mode is
allowed...

Most of what comes out of RHR is sydney traffic.

and there is something odd about the RHR configuration that means we
repeat everything from it, regardless I need to investigate what the
filter does.  Not sure what sort of TNC they are using.

-glen

On 10/01/2020 8:57 pm, Graeme wrote:
> Yes, with very little mobile traffic it is rather quiet out here Glen.
>
> Is RGI still set to digi wide1 msgs out of RHR if wide2-1 is specified and 
> available?
>
> Graeme 2HFG
>
> -----Original Message----- From: glenlist
> Sent: Friday, January 10, 2020 6:41 PM
> To: ozaprs at aprs.net.au
> Subject: Re: [OZAPRS] VK1RGI-1 config changes
>
> Hey, NSW Riverina, (is it) quiet out there these days with reformed
> configuration in VK1RGI-1 ?
>
> We might add some geofencing for the locals, also, since there exists
> the ability in direwolf to UI digi location dependent, since there is
> the local digi in town on Black Mountain.
>
>
> On 06/01/2020 08:29, L
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
_______________________________________________
OZAPRS mailing list
OZAPRS at aprs.net.au
http://lists.aprs.net.au/mailman/listinfo/ozaprs