[OZAPRS] MFJ 1270C uidigi

[Tim Logan]

Thanks Scott, this 1270c hasn’t been used with uidigi previously, so you may be onto something with it being a “C” issue. I will connect a terminal program to it and see what I can see.

Sent from my iPad

> On 13 Jul 2019, at 5:06 pm, Scott Evans <vk7hse at gmail.com> wrote:
> 
> It's been well over ten years since I touched uidigi, but I recall that you can connect a terminal program to seeing debug messages. It might also be that the MCU it's getting stuck in a loop and the watchdog timer kicks in and the MCU locks up.
> 
> I know that the MFJ-1270B TNC's don't have the issue with this, but I can't recall if there's an extra mod needed to be done with the MFJ-1270C
> 
> I'll dig though some old paperwork her and see if I have anything on the topic...
> From: OZAPRS <ozaprs-bounces at aprs.net.au> on behalf of Tim Logan <timlog77 at gmail.com>
> Sent: Saturday, July 13, 2019 4:49:31 PM
> To: OZAPRS at aprs.net.au
> Subject: [OZAPRS] MFJ 1270C uidigi
>  
> Hi brains trust,
> I’ve got a MFJ 1270c running uidigi. After about a day of running it appears to go to sleep... the dcd light still indicates it is seeing data, but the tx side stops, eg tx indicator doesn’t light up on the tnc, A power down cycle fixes it and away it will go again for about 24hrs or so. While in sleep it doesn’t beacon it’s own position. It’s running on a stable power supply. Any suggestions ? 
> Tim
> VK2HLT
> 
> Sent from my iPad
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.aprs.net.au/pipermail/ozaprs/attachments/20190713/1f941583/attachment.html>