[OZAPRS] RGI/RBM/Griffith digis
Glen English VK1XX
glenlist at pacificmedia.com.au
Thu Nov 2 11:03:55 AEDT 2017
and UHF would be easier, run 100W or something. so u are thinking as a
distribution backbne, rather than users listening to it ?
On 2/11/2017 10:56 AM, Matthew Cook wrote:
> If you've got the ability why not go 9600 baud on 70cm for a APRS-IS
> -> RF gateway. There is a channel already in the band plan for such
> activities, nothing says it has to be 1200 baud. There are plenty of
> radios out there now that can do 9600 baud, direwolf would eat it for
> breakfast.
>
> That has been something in the back of my mind to get installed here
> in Adelaide for a trial at some point.
>
> 73
>
> Matthew
> VK5ZM
>
> On 2 November 2017 at 09:12, Glen English VK1XX
> <glenlist at pacificmedia.com.au <mailto:glenlist at pacificmedia.com.au>>
> wrote:
>
> Josh, I think the RF message forwarding could be done. That would
> provide a reasonable utility for the region.
>
> Yeah will seek to add another transceiver channel up there, which is
> actually non trivial but on the list. Maybe 7575, UHF or 6m dunno.
>
> Make the most of the super site.
>
> g
>
>
> On 1/11/2017 5:42 PM, Josh wrote:
> > I can't see a good reason to put an igate there, unless you were
> > thinking of dropping the digipeater function altogether.
> > There's multiple igates with reliable and fast internet links within
> > RGI's footprint, so leave it to them rather than wasting your
> limited
> > bandwidth.
> >
> > But if you have the link available, setting up APRS-IS->RF message
> > forwarding could be a great service addition considering the
> range and
> > general area that RGI covers.
> > Bandwidth requirements would be extremely low too.
> >
> > - Josh VK2HFF
> >
> > On 1/11/2017 4:43 PM, Glen English VK1XX wrote:
> >
> >> The Ginini IP access, at least in the short term is a low
> bandwidth ~
> >> half duplex 50 kbps UHF IP bridge. good for SSH, remote control of
> >> things. How many bytes (UDP payload) is the IGATE "upload"
> >>
> >> ?
> >>
> >> given the APRS UI "pollution" of 5175 , we'll probably put a second
> >> channel on the direwolf and run different freq for connected
> mode stuff
> >> for WICEN...
> > _______________________________________________
> > OZAPRS mailing list
> > OZAPRS at aprs.net.au <mailto:OZAPRS at aprs.net.au>
> > http://lists.aprs.net.au/mailman/listinfo/ozaprs
> <http://lists.aprs.net.au/mailman/listinfo/ozaprs>
>
>
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au <mailto:OZAPRS at aprs.net.au>
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
> <http://lists.aprs.net.au/mailman/listinfo/ozaprs>
>
>
>
>
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
More information about the OZAPRS
mailing list