[OZAPRS] RGI/RBM/Griffith digis

[Dom Dahl]

That's fine Glen. Leave it the way it is. I didn't want to upset any igate
owners but in RHR's case it was hearing a lot of 1st packets but weren't
not ever reported to the IS server even though there were 5 or so igates in
the footprint.

Cheers Dom

On 1 Nov. 2017 16:43, "Glen English VK1XX" <glenlist at pacificmedia.com.au>
wrote:

> Hi Dom
>
> The Ginini  IP access, at least in the short term is a low bandwidth ~
> half duplex 50 kbps UHF IP bridge. good for SSH, remote control of
> things. How many bytes (UDP payload) is the IGATE "upload"
>
> ?
>
> given the APRS UI "pollution" of 5175 , we'll probably put a second
> channel on the direwolf and run different freq for connected mode stuff
> for WICEN...
>
>
> On 1/11/2017 12:46 PM, Dom Dahl wrote:
> > Hi Glen..
> >
> > Just wondering if you will have IP access at Ginini then you could set
> > up 1RGI as an igate?
> >
> > RHR is now an igate as we have internet on site for the DMR repeater.
> > We have noticed a big improvement in traffic getting through the
> > APRS.IS <http://APRS.IS>
> >
> > The biggest problem RHR had was the igates located in Sydney 70+km
> > away would get collisions and a lot of packets would not be reported.
> > Since the upgrade it has made a huge difference in Performance.
> >
> > Anyway food for thought..
> >
> > Dom
> > VK2HJ
> >
>
>
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.aprs.net.au/pipermail/ozaprs/attachments/20171102/26c27acb/attachment-0001.html>