[OZAPRS] TCP / IP over radio
Andrew Rich
vk4tec at tech-software.net
Tue Sep 6 11:49:43 AEST 2016
Thank you Scott
Yes need to look at payloads
Andrew
------------------------------------------
Andrew Rich
vk4tec at tech-software.net
VK4TEC
0419738223
> On 6 Sep 2016, at 11:47 AM, Scott Evans <vk7hse at gmail.com> wrote:
>
> Hi Andrew,
> This site shows you how to setup a basic ax25 stack on the raspberry pi and be able to use tcpip http://k4gbb.no-ip.org <http://k4gbb.no-ip.org/> this is targeted towards the TNCPI but the setup is same you'll just have to adjust the /dev/ttyAMA0 to suite your actual device (/dev/ttyUSBx)
>
> Just one other thing is that it works best as a point to point in full duplex otherwise you will most likely run into buffer overflow due to the overhead of the tcpip being encapsulated.
>
>
> On Tue., 6 Sep. 2016, 11:20 Andrew Rich, <vk4tec at tech-software.net <mailto:vk4tec at tech-software.net>> wrote:
> Hello
>
> I have a TNC and also a 433 MHz radio link I would like to try TCP/IP over
>
> Does anyone remember how to do this ?
>
> LINUX on Raspberry PI
>
> Andrew
>
>
> ------------------------------------------
> Andrew Rich
> vk4tec at tech-software.net <mailto:vk4tec at tech-software.net>
> VK4TEC
> 0419738223
>
>
>
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au <mailto:OZAPRS at aprs.net.au>
> http://lists.aprs.net.au/mailman/listinfo/ozaprs <http://lists.aprs.net.au/mailman/listinfo/ozaprs>
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.aprs.net.au/pipermail/ozaprs/attachments/20160906/b8abf381/attachment-0001.html>
More information about the OZAPRS
mailing list