[OZAPRS] TCP / IP over radio

[Scott Evans]

Hi Andrew,

This site shows you how to setup a basic ax25 stack on the raspberry pi and
be able to use tcpip http://k4gbb.no-ip.org this is targeted towards the
TNCPI but the setup is same you'll just have to adjust the /dev/ttyAMA0 to
suite your actual device (/dev/ttyUSBx)

Just one other thing is that it works best as a point to point in full
duplex otherwise you will most likely run into buffer overflow due to the
overhead of the tcpip being encapsulated.

On Tue., 6 Sep. 2016, 11:20 Andrew Rich, <vk4tec at tech-software.net> wrote:

> Hello
>
> I have a TNC and also a 433 MHz radio link I would like to try TCP/IP over
>
> Does anyone remember how to do this ?
>
> LINUX on Raspberry PI
>
> Andrew
>
>
> ------------------------------------------
> Andrew Rich
> vk4tec at tech-software.net
> VK4TEC
> 0419738223
>
>
>
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.aprs.net.au/pipermail/ozaprs/attachments/20160906/ded7ae69/attachment.html>