[OZAPRS] hardware suggestions

[Ross Delaforce]

+1 for the W3in1 (v2) model.  The v2 model is a big improvement over the initial unit.
The devices ethernet interface can be fed to a 3G/4G device for either device management/monitoring, APRS connectivity - or both.

A good quality radio to feed it and away you go!

Regards,

Rossco

Ross Delaforce -- ross at livewire.com.au
NATURELAND COMMUNICATIONS
YARRAVEL  NSW  Australia



 From:   Ben Weber <ben at weber.id.au> 
 To:   Australian APRS Users <ozaprs at aprs.net.au> 
 Sent:   15/02/2016 6:33 PM 
 Subject:   Re: [OZAPRS] hardware suggestions 

What's the budget? I would suggest the very solid WX3in1 by 
http://microsat.com.pl/ 
 
Connectivity could then be provided by any old cellular modem/router 
device - such as a TP-Link MR3420 with USB modem. I use this setup 
quite successfully, although not for APRS. 
 
On 15 February 2016 at 16:22, Liz <edodd55 at gmail.com> wrote: 
> If you were going to set up a new digipeater / igate which would need 
> its own radio, 3G telephone etc 
> what hardware would you use? 
> [Assume plenty of Linux knowledge] 
> While I have some old hardware, it may be more sensible to get fresh 
> working equipment. 
> 
> Liz 
> VK2XSE 
> _______________________________________________ 
> OZAPRS mailing list 
> OZAPRS at aprs.net.au 
> http://lists.aprs.net.au/mailman/listinfo/ozaprs 
_______________________________________________ 
OZAPRS mailing list 
OZAPRS at aprs.net.au 
http://lists.aprs.net.au/mailman/listinfo/ozaprs 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.aprs.net.au/pipermail/ozaprs/attachments/20160216/34980363/attachment.html>