<html><head></head><body>+1 for the W3in1 (v2) model. The v2 model is a big improvement over the initial unit.<div>The devices ethernet interface can be fed to a 3G/4G device for either device management/monitoring, APRS connectivity - or both.<br><div>A good quality radio to feed it and away you go!</div><div><br></div>Regards,<br><br>Rossco<br><br>Ross Delaforce -- ross at livewire.com.au<br>NATURELAND COMMUNICATIONS<br>YARRAVEL NSW Australia<br><br><br><div><strong>
From:
</strong>
Ben Weber <ben@weber.id.au>
<br>
<strong>
To:
</strong>
Australian APRS Users <ozaprs@aprs.net.au>
<br>
<strong>
Sent:
</strong>
15/02/2016 6:33 PM
<br>
<strong>
Subject:
</strong>
Re: [OZAPRS] hardware suggestions
<br><br><blockquote class="mori" style="margin:0 0 0 .8ex;border-left:1px solid #CCC;padding-left:1ex;">What's the budget? I would suggest the very solid WX3in1 by
<br>http://microsat.com.pl/
<br>
<br>Connectivity could then be provided by any old cellular modem/router
<br>device - such as a TP-Link MR3420 with USB modem. I use this setup
<br>quite successfully, although not for APRS.
<br>
<br>On 15 February 2016 at 16:22, Liz <edodd55@gmail.com> wrote:
<br>> If you were going to set up a new digipeater / igate which would need
<br>> its own radio, 3G telephone etc
<br>> what hardware would you use?
<br>> [Assume plenty of Linux knowledge]
<br>> While I have some old hardware, it may be more sensible to get fresh
<br>> working equipment.
<br>>
<br>> Liz
<br>> VK2XSE
<br>> _______________________________________________
<br>> OZAPRS mailing list
<br>> OZAPRS@aprs.net.au
<br>> http://lists.aprs.net.au/mailman/listinfo/ozaprs
<br>_______________________________________________
<br>OZAPRS mailing list
<br>OZAPRS@aprs.net.au
<br>http://lists.aprs.net.au/mailman/listinfo/ozaprs
<br></blockquote></div></div></body></html>