[OZAPRS] UIDIGI 1.9 problem?

[Owen Duffy]

Liz,

There are plenty of digis around that are INTENDED to provide 'fill-in'
coverage. Depending on the equipment, one of the methods used is that
they ONLY respond to a path element WIDE1-m where m>0 (UIDIGI is in this
category, IIRC so is UIVIEW both probably account for 90% of fill-in digis).

If you want to configure your radio to use them when available, set your
path to WIDE1-1,WIDE2-2.

That will probably fix the issue with 2RGF as well.

If you insist that there is only one problem and it is theirs, then tell
them what you think has happened and wait for them to fix it... but this
will not resolve the general issue (not a problem) that your radio
settings cannot exploit fill in digis that require WIDE1-m.

Owen