[OZAPRS] APRX not connecting to aprsis

[Liz Dodd]

I have set that on the computer I use in the car, /dev/radio, but
that's a separate set of problems.

On 12/5/14, Grant Diffey <gdiffey at gmail.com> wrote:
> if you really need the usb serial to be a particular device
>
> consider implementing a udev rule to name it somehting like /dev/radio
>
> udev rules can match on serial or phys bus or a bunch of other stuff..
>
> http://hintshop.ludvig.co.nz/show/persistent-names-usb-serial-devices/
>
> On Fri, Dec 5, 2014 at 7:24 AM, Liz Dodd <edodd55 at gmail.com> wrote:
>
>> On 12/4/14, Matthew Cook <vk5zm at bistre.net> wrote:
>> > Hi Liz,
>> >
>> > Hmmmm......
>> >
>> > Did it at least restart the USB subsystem and enumerate your USB device
>> > back to ttyUSB0 ?
>> Yes
>> >
>> > Have you undone the changes to aprx that you made swapping stuff over
>> > to
>> > ttyUSB1 ?
>> Yes
>> >
>> > Has your IP address upstream changed and with it your name servers?
>> Fixed IP, both external and internal
>> >
>> > Can you machine resolve internet addresses on the net?
>> >
>> > #ping www.google.com
>> pi can't but the server can
>>
>> >
>> > If the above comes back negative then it's likely your name servers in
>> > resolv.conf are no longer pointing you in the right direction.
>> /etc/resolv.conf is still as it should be
>>
>> On the server, bind9 is running
>> pi can't ping 216.58.220.96
>> pi can ping inside the network
>>
>> >
>> > Food for thought.
>> >
>> Long drive today, plenty of time for thinking
>>
>> Liz
>> VK2XSE
>> _______________________________________________
>> OZAPRS mailing list
>> OZAPRS at aprs.net.au
>> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>>
>