[OZAPRS] APRX not connecting to aprsis

[Grant Diffey]

if you really need the usb serial to be a particular device

consider implementing a udev rule to name it somehting like /dev/radio

udev rules can match on serial or phys bus or a bunch of other stuff..

http://hintshop.ludvig.co.nz/show/persistent-names-usb-serial-devices/

On Fri, Dec 5, 2014 at 7:24 AM, Liz Dodd <edodd55 at gmail.com> wrote:

> On 12/4/14, Matthew Cook <vk5zm at bistre.net> wrote:
> > Hi Liz,
> >
> > Hmmmm......
> >
> > Did it at least restart the USB subsystem and enumerate your USB device
> > back to ttyUSB0 ?
> Yes
> >
> > Have you undone the changes to aprx that you made swapping stuff over to
> > ttyUSB1 ?
> Yes
> >
> > Has your IP address upstream changed and with it your name servers?
> Fixed IP, both external and internal
> >
> > Can you machine resolve internet addresses on the net?
> >
> > #ping www.google.com
> pi can't but the server can
>
> >
> > If the above comes back negative then it's likely your name servers in
> > resolv.conf are no longer pointing you in the right direction.
> /etc/resolv.conf is still as it should be
>
> On the server, bind9 is running
> pi can't ping 216.58.220.96
> pi can ping inside the network
>
> >
> > Food for thought.
> >
> Long drive today, plenty of time for thinking
>
> Liz
> VK2XSE
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.aprs.net.au/pipermail/ozaprs/attachments/20141205/19ee4ce5/attachment-0001.html>