[OZAPRS] HELP WITH GARMIN NUVI 350 & OT3m

[Scott Habgood]

Steve,
          Yes, it is set up as your email says - waypoint out is on  (character length 9). Despatch menu is up & running, I can receive a msg from my VX8GR ok, just no display of POI.

What level do you have the audio set at?

Cheers,


Scott


  ----- Original Message ----- 
  From: Steve Sharp 
  To: Australian APRS Users 
  Sent: Wednesday, October 17, 2012 8:46 AM
  Subject: Re: [OZAPRS] HELP WITH GARMIN NUVI 350 & OT3m


  Hehe, just testing - that is the correct cable (sorry about that!) Garmin 010-10813-00 Mini-B Data Cable.


  First question, when you have it connected do you get access to the Despatch menu on the Nuvi?


  If not, check list:


  Nuvi powered through rear connector.


  FMI plugged into Nuvi side connector.


  Correct serial port on the OT3 is set to Garmin


  And Waypoint output in OT3 is on.


  That's how I recall mine as being set - short of pulling it out of the car and onto the PC to confirm the settings.


  Cheers, Steve VK2ARS


  On Tue, Oct 16, 2012 at 5:34 PM, Scott Habgood <webster01 at optusnet.com.au> wrote:

    Steve,
                Belay my last, I have the Garmin 010-10813-00 Mini-B Data Cable cable NOT the GTRANS 9F. This is what vI told to get. https://www.argentdata.com/catalog/product_info.php?products_id=90


    Is there any difference between the two that you are aware of?




    Scott 
    VK2UBQ



      ----- Original Message ----- 
      From: Steve Sharp 
      To: Australian APRS Users 
      Sent: Tuesday, October 16, 2012 1:01 PM
      Subject: Re: [OZAPRS] HELP WITH GARMIN NUVI 350 & OT3m


      Is this the cable? 


      GTRANS-9F


      https://www.argentdata.com/catalog/product_info.php?cPath=28&products_id=114&osCsid=fn9ervuub9kbm3oekq68bgrqp4


      If not, which one have you got?


      And have you got the Nuvi powered through the rear connector and the OT3 from the Nuvi's side connection?


      Steve VK2ARS


      On Sun, Oct 14, 2012 at 10:10 AM, Scott Habgood <webster01 at optusnet.com.au> wrote:

        Good morning, 
                              I'm after some help with my APRS mobile set up. I've got a FT8800R, Garmin Nuvi 350 & Argent Data System OT 3 TNC. 

        The OT3 is operating the radio correctly. My problem is the garmin 350 is not displaying POI, receiving messages or sending any messages from the FMI (GPS unit). I have the correct Garmin cable from Argent Data Systems. 

         I have tried the configuration program for the Open Tracker 3 & cant get any of the test tones to work (I cant hear them form my speaker or another radio).Can anyone shed some light - I'm getting frustrated with it.

        Cheers,



        Scott
        VK2UBQ-9
        Dubbo NSW

        _______________________________________________
        OZAPRS mailing list
        OZAPRS at aprs.net.au
        http://lists.aprs.net.au/mailman/listinfo/ozaprs






--------------------------------------------------------------------------


      _______________________________________________
      OZAPRS mailing list
      OZAPRS at aprs.net.au
      http://lists.aprs.net.au/mailman/listinfo/ozaprs



    _______________________________________________
    OZAPRS mailing list
    OZAPRS at aprs.net.au
    http://lists.aprs.net.au/mailman/listinfo/ozaprs






------------------------------------------------------------------------------


  _______________________________________________
  OZAPRS mailing list
  OZAPRS at aprs.net.au
  http://lists.aprs.net.au/mailman/listinfo/ozaprs
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.aprs.net.au/pipermail/ozaprs/attachments/20121017/5c43043e/attachment.html>