[OZAPRS] ARISS APRS config issues

[David Uzzell Jnr]

Thanks Robert. 

I tried just ARISS this morning as that file and it didn't work so I followed your lead now and it worked like a treat :) thank you very much. 

VK4VKG-8 made it as a HH with standard antenna into the ISS APRS Digipeater. 

David

Sent from iPhone 

On 08/01/2012, at 9:33 AM, Robert Clatworthy <rclaty at gmail.com> wrote:

> Your path needs to have ARISS in it for it to appear on ariss.net website.  The suggested path by aprs.net.au is ARISS, SGATE, WIDE2-1
> I have seen others get away with just using the ARISS. 
>  
> Robert 
> VK2BRC
> 
> 
> On 8 January 2012 09:03, David Uzzell Jnr <david at uzzell.com.au> wrote:
> Hi all
> 
> I tried this a while ago and couldn't get it to identify to the ARISS site and I tried again this morning.
> 
> I changed a few settings and followed http://proficia.com/tampadstar/tm-d710%20aprs%20and%20iss.pdf as close as I could with the kenwood hh and still the same result I end up on the normal aprs webpage being gated by VK2BRC, thank you for running a sgate but I don't know why I end up not getting on the ARISS site.
> 
> If someone knows what I am doing wrong and could point me to so further research that would be greatly appreciated.
> 
> David
> VK4VKG
> 
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
> 
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.aprs.net.au/pipermail/ozaprs/attachments/20120108/23a7bb82/attachment.html>