[OZAPRS] Help with MJF-1270b and UI-View32
vk5zey at kernit.com.au
Sun Dec 30 22:16:09 EST 2012
Yes MONITOR ON
From: ozaprs-bounces at aprs.net.au [mailto:ozaprs-bounces at aprs.net.au] On
Behalf Of Matthew Cook
Sent: Sunday, 30 December 2012 9:33 PM
To: Australian APRS Users
Subject: Re: [OZAPRS] Help with MJF-1270b and UI-View32
Have you tried with a serial comms program the "MONITOR" command? To be
able to see APRS UI frames at a console level you may need to send "MONITOR
ON" to the TNC, otherwise it will stay waiting for a AX25 connection to
Just my initial thoughts and 0.022c worth (inc GST sans carbon tax)
On 30 December 2012 14:39, Phil Kern <vk5zey at kernit.com.au
<mailto:vk5zey at kernit.com.au> > wrote:
Recently dusted off an old MJF-1270b which I used to use with 'packet' many
Now trying to configure this with UI-View32. I'm unsure about the config
within the Comms Setup Area.
It appears to be connected on the default setting. Just can't seem to
decode anything on the terminal screen.
Have followed the Config Guides on aprs.net.au <http://aprs.net.au> Aprs
via Internet seems to decode correctly.
Any help or pointing me in the right direction, would be greatly
OZAPRS mailing list
OZAPRS at aprs.net.au <mailto:OZAPRS at aprs.net.au>
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the OZAPRS