[OZAPRS] VK2RGN-1 Now Online (Justin Albury)
Pete
vk3tbn at hotmail.com
Mon Apr 2 19:02:27 EST 2012
Ian
Good idea, that would work, you could gate local Wx and messages too to make it more locally appropriate
Regards
Pete
Sent from my iPad
On 02/04/2012, at 12:30 PM, Ian Mills <vk2him at gmail.com> wrote:
> Hi Justin and Carl,
>
> Looking at the raw packets on aprs.fi, 2RGN-1 is occasionally making it directly into 1RGI-1 as well as 2RUW, however contact is extremely erratic which is a shame.
>
> 2012-04-01 01:50:03 EST: VK2RGN-1>APNU19,VK1RGI-1*,WIDE2-1,qAR,VK2YYZ-5:!3445.60SS14945.71E#PHG4630/W2 Digi Goulburn
>
> The last time a packet was received was 1:00am this morning via 2RUW and my igate.
>
> 2012-04-02 01:03:05 EST: VK2RGN-1>APNU19,VK2RUW-1*,WIDE2-1,qAR,VK2HIM-1:!3445.60SS14945.71E#PHG4630/W2 Digi Goulburn
>
> On Friday and over the weekend I watched a few mobile stations leave Sydney/ Canberra and travel via Goulburn with not many packets making it to the internet via 2RGN, again this is a shame as I'm suer a lot of hard work has been put in by Justin.
>
> Since access to the higher TX site isn't possible, perhaps if Justin ran a RX only igate in Goulburn it would give the expected reliability results?
>
> Cheers
> Ian vk2him
>
>
> Message: 4
> Date: Sun, 1 Apr 2012 22:56:34 +1000
> From: Carl Makin <carl at stagecraft.cx>
> To: Australian APRS Users <ozaprs at aprs.net.au>
> Subject: Re: [OZAPRS] VK2RGN-1 Now Online
> Message-ID: <9DFD67BE-8CAD-4A7E-8DEC-98C9966376FA at stagecraft.cx>
> Content-Type: text/plain; charset="windows-1252"
>
> Hi Justin,
>
> On 01/04/2012, at 8:56 PM, Justin Albury wrote:
>
> > When looking at aprs.fi I don?t seem to see very many locations or routes marked out on the map. What Wide should I be using on my gear given Goulburn is bouncing through RGI into Canberra iGate
>
> It looks like vk2rgn-1 is going via vk2ruw-1 into the vk2him-1 igate. I'm not seeing it via Ginini (vk1rgi) at all which suggests Ginini can't hear it.
>
> What digipeater path are you using? Ginini will respond to wide2-* and sensw2-*, so you should have both of those installed.
>
>
> Carl.
> (vk1kcm)
> --
>
> www.theshackbythebeach.com
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.aprs.net.au/pipermail/ozaprs/attachments/20120402/41abc643/attachment.html>
More information about the OZAPRS
mailing list