[OZAPRS] VK2RGN-1 Now Online

[Justin Albury]

Thanks for the feedback.  I wasn't sure how we would go with coverage on the lower location.  I will have to redo the eprom to reflect the correct repeater site location.

When looking at aprs.fi I don't seem to see very many locations or routes marked out on the map.  What Wide should I be using on my gear given Goulburn is bouncing through RGI into Canberra iGate

Justin - VK2HJA

From: ozaprs-bounces at aprs.net.au [mailto:ozaprs-bounces at aprs.net.au] On Behalf Of Steve
Sent: Sunday, 1 April 2012 7:12 AM
To: Australian APRS Users
Subject: Re: [OZAPRS] VK2RGN-1 Now Online

As someone who has always wished for a wide in Goulburn, I'd like to say a big public thanks.
It looks to have decent coverage too. My trekking around Bungendore yesterday got some packets in via VK2RGN-1.
Again, thanks very much for your efforts.

Steve (VK2ZSZ)



On 03/28/2012 08:43 PM, Justin Albury wrote:
Hi Guys

Digipeater VK2RGN-1 is now online in Goulburn.  I was unable to install it on Mt Gray due to 2m repeater input being too close to APRS.
The unit is on Signal Hill in Goulburn.

What has to be done on aprs.fi to show it as part of the path to VK1RGI-1 via VK2RGN-1?

Justin - VK2HJA




_______________________________________________

OZAPRS mailing list

OZAPRS at aprs.net.au<mailto:OZAPRS at aprs.net.au>

http://lists.aprs.net.au/mailman/listinfo/ozaprs
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.aprs.net.au/pipermail/ozaprs/attachments/20120401/0a9482eb/attachment.html>