[OZAPRS] VK2RMC-1
Ray Wells
vk2tv at exemail.com.au
Wed Nov 2 12:29:58 EST 2011
All,
I've ordered the DCD board from Paccomm.
Ray vk2tv
On 11/1/2011 5:01 PM, Ray Wells wrote:
> All,
>
> It was recently reported to me that vk2rmc-1 may not be working - I
> currently have no aprs gear set up to confirm this. The FM828 heatsink
> was warm which indicates the digi was doing some (regular) transmitting.
>
> Today I removed the radio and TNC so that I can give them the once
> over on the "bench". This exercise will provide me with an opportunity
> to marry up a Site Alert unit that was built up and functioning, but
> gathering dust for a couple of years and, to install a different power
> supply.
>
> Does anybody on this list have a State Machine kit for a Tiny 2 that
> can be swapped for cash? I can import one from Pacomm but better to
> ask here first. With a State Machine installed in the Tiny 2, I can
> replace an MFJ1270B with something smaller, more modern and more
> efficient.
>
> Ray vk2tv
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>
More information about the OZAPRS
mailing list