[OZAPRS] How do I configure HF to VHF Gateway
Olsen's Tours and Training
davejust at bigpond.net.au
Wed Jun 15 07:17:21 EST 2011
Hi Larry
Thanks for the assistance and suggestions. I am trying to keep things as simple as I can. Just installing DigiNed seems daunting.
I want it simple so it is reliable. I understand digined is quite stable, but I find the least reliable part of the process is the Packet engine which seems to generate all of the problems I have with instability.
At present with my new setup, I don't yet seem to be sending data to aprs-is at least not when I look at aprs.fi.
In the Gateway Tab of of AGWIUDigi I see I have supposedly gated packets to aprs-is GT:Fm VK2IO-4 To APU25N Via MYGATE <IU pid=F0 Len59 >[04:17:34] but no sign of it on aprs.fi
David
On 15/06/2011, at 6:55 AM, Larry wrote:
> Hi David
>
> Yes that is correct AGWPE (pro or standard do not do X-port digiing - AGWUIdigi does.) In my configuration I only use AGWPE to interface to the radios and to feed data to other client software (ui-view, AGW Tracker, Xastir). I use Digi_ned to do all the heavy lifting - it is very configurable and multi platform. I suggest you have a look at it and if you wish to go down the path of establishing a full blown igate then I can help with configs etc.
>
> At the moment my setup is a real hybrid:
>
> Radios: HF 2 x Codan 8528 (30m & 40m)
> VHF Motorola GM300
> Interfaces: VHF HF MFJ 1270B TNC (AGWPE)
> 30m HF SCS Tracker/DSP TNC (AGWPE)
> 40m HF Griffen Imic to PC soundcard (AGWPE)
> Client software: Digi_Ned (main HF/VHF gateway)
> : Ui-view (APRS server interface, home network processing)
> : AGWTracker (home network processing)
>
> All software is loaded on a dedicated 12V PC ( Windows XP ) which runs 24/7. I have the intention of porting the whole shebang to Linux but that is in the future perhaps. The whole shack is run on a rather large battery bank which can provide about 7 days power without recharging.
>
> I have no doubt that there are much more sophisticated and cleaner/tidier ways of setting up an Igate but it works for me!
>
> Cheers
>
> Larry vk5ly
>
> ----- Original Message ----- From: "Olsen's Tours and Training" <davejust at bigpond.net.au>
> To: "Australian APRS Users" <ozaprs at aprs.net.au>
> Sent: Tuesday, June 14, 2011 7:50 PM
> Subject: Re: [OZAPRS] How do I configure HF to VHF Gateway
>
>
>> Been searching on the net and it seems AGWTracker does not act as igate or cross port digi, so I need to download AGWUIdigi as well.
>>
>> On 14/06/2011, at 7:54 PM, Olsen's Tours and Training wrote:
>>
>>> I would like to port HF signals received to VHF.
>>>
>>> Presently I am running
>>>
>>> AGWtracker and Packet Engine Pro.
>>>
>>> My setup is
>>>
>>>
>>> HF Radio using SignaLinkUSB to PEPro to AGWTracker
>>>
>>> VHF Radio using TinyTrack4 running as TNC Clone to PEPro to AGWtracker
>>>
>>> How can I configure what I have to port HF signals to VHF?
>>>
>>> David
>>> _______________________________________________
>>> OZAPRS mailing list
>>> OZAPRS at aprs.net.au
>>> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>>
>> _______________________________________________
>> OZAPRS mailing list
>> OZAPRS at aprs.net.au
>> http://lists.aprs.net.au/mailman/listinfo/ozaprs
>>
>>
>> -----
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 10.0.1382 / Virus Database: 1513/3702 - Release Date: 06/13/11
>
> _______________________________________________
> OZAPRS mailing list
> OZAPRS at aprs.net.au
> http://lists.aprs.net.au/mailman/listinfo/ozaprs
More information about the OZAPRS
mailing list